Instructions

User interface
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
8
Table 2.3 Menu Device
Transfer application to device
Upload the current project to the device memory (sect.
3.7)
Firmware update…
Update the firmware of the connected device (sect.
3.8)
Device information
Information about the software, the target device and
the connected device (sect. 3.5)
Variable table…
The editable table of the project variables with their
parameters (sect. 5)
Calibration…
Start calibration (sect. 4.7)
Configuration…
Device configuration (sect. 4)
Port settings…
Settings of the programming interface (sect. 3.4)
Fig. 2.4 Menu Device
Fig. 2.5 Menu Service
Fig. 2.6 Menu Help
Table 2.4 Menu Service
Arrange elements
Function blocks of the same type are automatically renum-
bered in the workspace from top to bottom and from right to
left (sect. 7.9)
Simulation
Start / stop simulation (sect. 7.11)
Language
Select the interface language
OFFLINE mode
Activate OFFLINE mode (sect. 3.4.1)
Table 2.5 Menu Help
Automatic update
check
If activated, the update check is performed on program startup
Check for updates
Check if software updates are available
Help
Online help
Version history
The list of changes for all software versions
About Software
Information about the current software version