Instructions

Device configuration
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
24
4 Device configuration
The configuration of the device is a part of a project and can be set using the menu item
Device > Configuration. The dialog window Device configuration consists of two parts.
The configurable parameters of the device are presented in the parameter tree in the left
part of the window. The content of a group is presented in the right part.
The content of the parameter tree depends on the target device and may include the fol-
lowing groups:
 Display
 Clock
 Interfaces
 Extension modules
 Inputs
 Outputs
All the settings are saved in the project, except the clock settings. The configuration is
also possible without connecting the device.
4.1 Display
If the target device has a display, the following parameters can be set:
Backlight – the duration of the backlight since the last user activity
Brightness – 0…100%
Contrast – 0…100%
The button Read can be used to read out the current display settings from the connected
device.
Fig. 4.1
4.2 Clock
If the target device has a built-in real-time clock, the date and time can be set in the
Clock group.