Instructions

Usage basics
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
21
Fig. 3.5
The window Device Information contains the following information:
Target device – the device for which the project was created
Connected device – the information about the device connected to the PC
Export into project – the button is active only if the device PR114-224.8D4A.4RXXXX is
connected. It can be used to export the real output types of the connected device into the
project. Alternatively the type of each output can be manually changed in Property Box
in accordance with the hardware.
3.6 Project information
Use the menu item File > Project information to view and modify the information about
the project. The tab General contains the information about the version of the software.
Software version at project creation – the version of the software in which the project
has been created
Software version at project modification – the version of the software in which the pro-
ject has been modified
Fig. 3.6
The tab Project contains information about project version and is only for PR200 availa-
ble.
Fig. 3.7
Group – project group name
Name – project number within a Group
Version – project version
After you complete the desired entries, confirm them with OK, or click Cancel to discard
them.
3.7 Upload project to device
Attention! The program already stored in the connected device will be replaced by the
new one.