Instructions

Device configuration
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
36
Fig. 4.28 PR200 output calibration
Proceed the same way with the other outputs if needed. The message about the calibra-
tion results will appear after the completion of the calibration.
Fig. 4.29
4.8 Change target device
The target device of a project can be changed using the menu item File > Change target
device. A list of devices to which you can transfer the project appears. Select the device
and confirm with OK. Check and repair broken links, if any. The program can be checked
using simulation (sect. 7.11). Save the modified project.
Consider the replacement rules:
1. The workspace size will be automatically adjusted to the changed number of I/O
points.
2. User-configured layout of I/O points remains. New I/O points will be placed after ex-
isting I/O points of the original project.
3. The connections of I/O points whose data type has been changed will be removed.
4. If the number of I/O points becomes less than in the original project, the connections
of the removed I/O points will be also removed.
5. If there were extension modules in the original project, they will be transferred to the
new configuration with their connections.
6. Settings of analog I/O points will be transferred if there are analog I/O points on the
new device.
7. Network interfaces will be transferred unchanged.
8. Display settings will be transferred unchanged.
9. Variables will be transferred unchanged.