Instructions

Device configuration
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
32
Fig. 4.17 Slave configuration in slave mode
Select the master in the tree to set the parameters for data exchange.
Fig. 4.18 Master configuration in slave mode
The common parameters for data exchange can be set in the upper window part.
 Name – the name of the master displayed in the tree
 Address – the network address of the master
 Change register order – the register order in two-register variables
 Change byte order – the byte order in the register
 Comment – the text comment to describe the device
The list of the variables to be requested by the master is in the lower part of the window.
Each variable created in this list can be found in the variable table under the tab Net-
work, Slot X (sect. 5.5).
Add a variable by clicking the icon New variable and set its properties.
Fig. 4.19 Variable configuration in slave mode
 Name – the name of the variable
 Type – the data type of the variable: BOOL, INT or REAL
 Register – the register address. The range of the available addresses is specified in
the device user guide.
 Comment – the text comment to describe the requested variable