Instructions

Usage basics
akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany · Tel.: [phone] · www.akytec.de
20
If the operating system does not find the correct driver, install the driver for PR200 or for
the adapter PR-KP20. It can be downloaded from akytec.de.
Select the port number in the dialog window Port settings and confirm with OK. All other
settings are fixed and displayed only for your information.
If the connection is established, the information about the connected device and the serial
port is shown in the status indicators.
Fig. 3.3
3.4.1 OFFLINE mode
In this mode, the connection between ALP and the device is interrupted.
The mode is helpful when you work with two ALP instances running on PC and trying to
communicate with the same device. Both applications will alternately occupy the port and
the connection to the device will be constantly interrupted.
The application that should not communicate with the device should be switched to
OFFLINE mode.
Fig. 3.4
OFFLINE mode can be activated / deactivated using the menu item Service > OFFLINE
mode or by clicking the status indicator Device (sect. 2.7). With the next click is OF-
FLINE mode deactivated.
3.5 Device information
To view information about the software, the target device and the connected device use
the menu item Device > Information… or the icon in the toolbar.