User Guide

86
 Press on screen -> click icon .
 Click on Wireless & Networks.
 Click on Bluetooth.
 Open the Bluethooth. The VP-R73G scans and displays the IDs of
all available Bluetooth devices in range. Ifuser would like to pair with
other devices which do not show up in the list, please ensure that the
other device is turned on and set to be discoverable.
 If the VP-R73G stops scanning before the other device is ready, turn
off the R73G Bluethooth, then turn on again.
 The discovered device will show in the available devices list with
device ID. Make sure the Bluetooth device is active in pairing
mode. Then tap on the device ID on the VP-R73G to pair them.
Confirm the passkey in the prompted message (if any). Or if PIN is
required, please refer to the device’s documentation or other
procedures to obtain the PIN.