User's Manual

81
z IftheVPR48Gstopsscanningbeforetheotherdeviceisready,turnofftheR48G
Bluethooth,thenturnonagain.
z The discovered device will show in the available devices list with device ID. 
MakesuretheBluetoothdeviceisactiveinpairingmode.Thentaponthedevice
IDontheVPR48Gtopairthem.Confirmthepasskeyinthepromptedmessage
(ifany).OrifPINisrequired,pleaserefertothedevice’sdocumentationorother
procedurestoobtainthePIN. 
5.16.4 UnpairingABluetoothDevice
After successfully paired, the VPR48G will show in Paired devices bar with paired
devicename.
Once it’s connected, users can tap icon
 ,then click FORGET to unpair the
connecteddevice. 
5.17 USB
ThevideophonesupportsUSBconnectionforkeyboardandUSBstoragedevices.To
use USB keyboard, simply plug it into the USB port on the right side of the video
phoneanditwillbereadytouse.
ToconnectandaccessUSBstoragedevice:
z InsertUSBstoragedeviceintoUSBportattherightsideofvideophone.
z Itwilltakeafewsecondsforthevideophonetopreparetheconnection.
z To access USB storage, click on the main screen
 > click Explorer icon
 >click mnton the right uppur corner>click usb_storage, to access and
manageyourdata.Shownasbelow.