User's Manual

6
8
ensure that the other device is turned on and set to be discoverable;

If the VP-R47P stops scanning before the other device is ready, touch SEARCH
FOR DEVICE;

The discovered device will show in the available devices list with device ID. If it’s
unpaired, it will show “Pairing” under the device ID. Make sure the Bluetooth
device is active in pairing mode. Then tap on the device ID on the VP-R47P to
pair them. Confirm the passkey in the prompted message (if any). Or if PIN is
required, please refer to the device’s documentation or other procedures to
obtain the PIN.
5.9.4 Un-pairing A Bluetooth Device
After successfully pared, the VP-R47P will show item “PAIRED DEVICES” above the
Bluetooth device ID in the scan list.
Once it’s connected, users could also tap on to the Bluetooth device ID needed to be
unpair, then tap on Unpair in the prompted message.
5.10 USB
The video phone supports USB connection for keyboard and USB storage devices. To
use USB keyboard, simply plug it into the USB port on the right side of the video
phone and it will be ready to use.
To connect and access USB storage device:
 Insert USB storage device into USB port at the right side of video phone;
 It will take a few seconds for the video phone to prepare the connection;

To access USB storage, click on the screen -> Explorer -> USB, to access
and manage your data.