Product Info
Table Of Contents
- 1.Product Overview
- 2.Change Log
- 3.Introduction to Configuration Menu
- 4.Access the Device
- 5.Language and Time Setting
- 6.LED Setting
- 7.Volume and Tone Configuration
- 8.Network Setting
- 9.Intercom Call Configuration
- 10.Audio& Video Codec Configuration for SIP Calls
- 11.Access White List Configuration
- 12.Relay Setting
- 13.Door Access Schedule Management
- 14.Door Unlock Configuration
- 15.Security
- 16.Monitor and Image
- 17.Logs
- 18.Debug
- 19.Firmware Upgrade
- 20.Backup
- 21.Auto-provisioning via Configuration File
- 22.Integration with Third Party Device
- 23.Password Modification
- 24.System Reboot&Reset
- 25.Abbreviations
- 26.FAQ
- 27.Contact us
Single Tenant Door Phone
AKUVOX SMART INTERCOM www.akuvox.com
82
22. Integration with Third Party Device
22.1.Integration via Wiegand
If you want to integrate Akuvox door phone with the third party devices via
Wiegand, you can configure the Wiegand on the web interface.
Parameter set-up:
Wiegand Type: set the wiegand data transmission format among three
options: Wiegand 26, Wiegand 34, Wiegand 58. The transmission format
should be identical between the door phone and the device to be
integrated.
Wiegand Mode:: set the Transfer mode between Input or Output if the
door phone is used as a receiver then set it as “ Input” for the door phone
and vice versa.