Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronics2-Wire lntercom

Table Of Contents

1.Product Overview
2.Change Log
3.Introduction to Configuration Menu
4.Access the Device
- 4.1.Obtain Device IP Address
- 4.2.Access the Device Setting on the Web Interface
5.Language and Time Setting
- 5.1.Language Setting
- 5.2.Time Setting
6.LED Setting
- 6.1.Infrared LED Setting
- 6.2.LED Display Status
- 6.3.Set up LED Display from HTTP URL
- 6.4.LED Setting on Card Reader Area
- 6.5.LED Settings on Keypad
7.Volume and Tone Configuration
- 7.1.Volume Configuration
- 7.2.Open Door Tone Configuration
- 7.3.Upload Tone Files
  - 7.3.1.Upload Ringback Tone
  - 7.3.2.Upload Open Door Tone
8.Network Setting
- 8.1.Network Status
- 8.2.Device Network Configuration
- 8.3.Device Deployment in Network
- 8.4.Device Local RTP configuration
- 8.5.NAT Setting
- 8.6.WIFI Setting
9.Intercom Call Configuration
- 9.1.IP call & IP Call Configuration
- 9.2.SIP Call &SIP Call Configuration
- 9.3.SIP Account Registration
- 9.4.SIP Server Configuration
- 9.5.Configure Outbound Proxy Server
- 9.6.Configure Data Transmission Type
- 9.7.Configure Calling Feature
10.Audio& Video Codec Configuration for SIP Calls
- 10.1.Audio Codec Configuration
- 10.2.Video Codec Configuration
- 10.3.Configure DTMF Data Transmission
11.Access White List Configuration
- 11.1.Managing Contact Group
- 11.2.Managing Contacts
12.Relay Setting
- 12.1.Relay Switch Setting
- 12.2.Select Chime Bell Relay
- 12.3.Web Relay Setting
13.Door Access Schedule Management
- 13.1.Configure Door Access Schedule
  - 13.1.1.Manage Door Access Schedule
14.Door Unlock Configuration
- 14.1.Configure Access Card Format
- 14.2.Configure Access Card for Door Unlock
- 14.3.Import and Export Card Data of Access Control
- 14.4.Configure Open Relay via HTTP for Door Unlock
- 14.5.Configure Exit Button for Door Unlock
15.Security
- 15.1.Tamper Alarm Setting
- 15.2.Motion Detection
  - 15.2.1.Configure Motion Detection
- 15.3.Security Notification Setting
- 15.4.Security Action Configuration
- 15.5.Voice Encryption
- 15.6.User Agent
16.Monitor and Image
- 16.1.RTSP Stream Monitoring
  - 16.1.1.RTSP Basic Setting
  - 16.1.2.RTSP Stream Setting
- 16.2.MJPEG Image Capturing
- 16.3.ONVIF
- 16.4.Live Stream
17.Logs
- 17.1. Call Logs
- 17.2.Door Logs
18.Debug
- 18.1.Event Log
- 18.2.System Log
- 18.3.PCAP
19.Firmware Upgrade
20.Backup
21.Auto-provisioning via Configuration File
- 21.1.Provisioning Principle
- 21.2.Configuration Files for Auto-provisioning
- 21.3.AutoP Schedule
- 21.4.PNP Configuration
- 21.5.Static Provisioning Configuration
22.Integration with Third Party Device
- 22.1.Integration via Wiegand
- 22.2.Integration via HTTP API
23.Password Modification
- 23.1.Modifying Device Web Interface Password
- 23.2.Configure Web Interface Automatic Logout
24.System Reboot&Reset
- 24.1.Reboot
- 24.2.Reset
25.Abbreviations
26.FAQ
27.Contact us

Single Tenant Door Phone

AKUVOX SMART INTERCOM www.akuvox.com

span during which the LED light can be disabled in order to reduce the

electrical power consumption.

Parameters Set-up:

 Enabled: Tick the check box if want to enable the card reader LED lighting

and vice versa.

 Start Time- End Time (H): enter the time span for the LED lighting to be

valid, e.g. if the time span is set from 8-0 (Sart time- End time) it means

LED light will stay on during the time span from 8:00 am to 12:00 pm

during one day (24 hours).