Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronics2-Wire lntercom

Table Of Contents

1.Product Overview
2.Change Log
3.Introduction to Configuration Menu
4.Access the Device
- 4.1.Obtain Device IP Address
- 4.2.Access the Device Setting on the Web Interface
5.Language and Time Setting
- 5.1.Language Setting
- 5.2.Time Setting
6.LED Setting
- 6.1.Infrared LED Setting
- 6.2.LED Display Status
- 6.3.Set up LED Display from HTTP URL
- 6.4.LED Setting on Card Reader Area
- 6.5.LED Settings on Keypad
7.Volume and Tone Configuration
- 7.1.Volume Configuration
- 7.2.Open Door Tone Configuration
- 7.3.Upload Tone Files
  - 7.3.1.Upload Ringback Tone
  - 7.3.2.Upload Open Door Tone
8.Network Setting
- 8.1.Network Status
- 8.2.Device Network Configuration
- 8.3.Device Deployment in Network
- 8.4.Device Local RTP configuration
- 8.5.NAT Setting
- 8.6.WIFI Setting
9.Intercom Call Configuration
- 9.1.IP call & IP Call Configuration
- 9.2.SIP Call &SIP Call Configuration
- 9.3.SIP Account Registration
- 9.4.SIP Server Configuration
- 9.5.Configure Outbound Proxy Server
- 9.6.Configure Data Transmission Type
- 9.7.Configure Calling Feature
10.Audio& Video Codec Configuration for SIP Calls
- 10.1.Audio Codec Configuration
- 10.2.Video Codec Configuration
- 10.3.Configure DTMF Data Transmission
11.Access White List Configuration
- 11.1.Managing Contact Group
- 11.2.Managing Contacts
12.Relay Setting
- 12.1.Relay Switch Setting
- 12.2.Select Chime Bell Relay
- 12.3.Web Relay Setting
13.Door Access Schedule Management
- 13.1.Configure Door Access Schedule
  - 13.1.1.Manage Door Access Schedule
14.Door Unlock Configuration
- 14.1.Configure Access Card Format
- 14.2.Configure Access Card for Door Unlock
- 14.3.Import and Export Card Data of Access Control
- 14.4.Configure Open Relay via HTTP for Door Unlock
- 14.5.Configure Exit Button for Door Unlock
15.Security
- 15.1.Tamper Alarm Setting
- 15.2.Motion Detection
  - 15.2.1.Configure Motion Detection
- 15.3.Security Notification Setting
- 15.4.Security Action Configuration
- 15.5.Voice Encryption
- 15.6.User Agent
16.Monitor and Image
- 16.1.RTSP Stream Monitoring
  - 16.1.1.RTSP Basic Setting
  - 16.1.2.RTSP Stream Setting
- 16.2.MJPEG Image Capturing
- 16.3.ONVIF
- 16.4.Live Stream
17.Logs
- 17.1. Call Logs
- 17.2.Door Logs
18.Debug
- 18.1.Event Log
- 18.2.System Log
- 18.3.PCAP
19.Firmware Upgrade
20.Backup
21.Auto-provisioning via Configuration File
- 21.1.Provisioning Principle
- 21.2.Configuration Files for Auto-provisioning
- 21.3.AutoP Schedule
- 21.4.PNP Configuration
- 21.5.Static Provisioning Configuration
22.Integration with Third Party Device
- 22.1.Integration via Wiegand
- 22.2.Integration via HTTP API
23.Password Modification
- 23.1.Modifying Device Web Interface Password
- 23.2.Configure Web Interface Automatic Logout
24.System Reboot&Reset
- 24.1.Reboot
- 24.2.Reset
25.Abbreviations
26.FAQ
27.Contact us

Single Tenant Door Phone

AKUVOX SMART INTERCOM www.akuvox.com

Parameter Set-up:

 Time Zone: select the specific time zone depending on where the device

is used and then press Confirm tab for the confirmation. The default time

zone is GMT GMT+0.00.

 Primary/Secondary Server: the time zone server,normally it will

automatically obtain the time when connecting to the network. The

secondary server will take effect when the primary server is invalid.

 Update Interval: to configure interval between two consecutive NTP

requests.

You can also set up time manually, select the Manual checkbox, and input

time data.