User Guide


50
4.1.2. Discovery setting
If Discovery mode is adopted, users don’t need to configure the
devices by themselves. IT83X will scan automatically all types of
the devices on the same discovery node.
On the device, go to More - Settings - More to configure the
discovery mode and location name. Discovery Node/Device
Address: To indicate the locations of the device (For example,
device address 1.1.1.1.1 means that this device is located in
Community 1, Building 1, Unit 1, Floor 1, Room 1).
Discovery Extension/Device Extension: To display the extension
number of the device.
Location/Device Location: To enter the name/location to
distinguish devices from each other.
On the web portal Network - Advanced, users can also make
changes to the device connecting node.
Figure 4.1.2-1 Discovery setting
Figure 4.1.2-2 Discovery setting in web