Product Info
Table Of Contents
- 1.1.Device Start-up Network Selection
- 1.2.Device Home Screen Type Selection
- 1.3.Accessing the Device Setting on the Device
- 1.4.Access the Device Setting on the Web Interface
- 1.5.Language Setting
- 1.6.Time Setting
- 1.7.Screen Display setting on the Device
- 1.8.Screen Display Setting on the Web Interface
- 1.9.Screensaver Configuration
- 1.10.Upload Wall Paper
- 1.11.Status Bar
- 1.12.Upload Device Booting Image
- 1.13.Icon Screen Display Configuration
- 1.14.Volume Configuration
- 1.15.Phone Book Configuration on the Device
- 1.16.Phone Book Configuration on the Web Interface
- 1.17.Device Network Configuration
- 1.18.Device Deployment in Network
- 1.19. Device NAT Setting
- 1.20. Device Bluetooth Setting
- 1.21.Device Wi-Fi Setting
- 1.22.IP call & IP Call Configuration
- 1.23.SIP Call &SIP Call Configuration
- 1.24.SIP Account Registration
- 1.25.SIP Server Configuration
- 1.26.Outbound Proxy Server configuration
- 1.27.SIP Call DND & Return Code Configuration
- 1.28.Device Local RTP configuration
- 1.29.Data Transmission Type Configuration
- 1.30.Call Setting
- 1.31. Intercom Call Configuration
- 1.32.PTime Configuration
- 1.33.SIP Hacking Protection
- 1.34.Emergency Call Setting
- 1.35.RF Setting (Optional)
- 1.36.Multicast Configuration
- 1.37.Call Forwarding Setting
- 1.38.Manage Messages
- 1.39. Configure Voice Message (MWI)
- 1.40.Audio Codec Configuration
- 1.41.Video Codec Configuration
- 1.42.Monitor and Image
- 1.43.Alarm and Arming Configuration
- 1.44.Screen Unlock Setting
- 1.45.Voice Encryption
- 1.46.Remote Control
- 1.47.Relay Switch Setting
- 1.48.Web Relay Setting
- 1.49.Door Unlock Configuration
- 1.50.Configure Lift Control
- 1.51.Configure Lift Control Prompt
- 1.52.Provisioning Principle
- 1.53.Introduction to the Configuration Files for Auto-P
- 1.54.Autop Schedule
- 1.55.DHCP Provisioning Configuration
- 1.56.Static Provisioning Configuration
- 1.57.System Log for Debugging
- 1.58. PCAP for Debugging
- 1.59. User Agent
- 1.60.Enter Applications Screen
- 1.61. Install Third-party App
- 1.62.Modify Device Basic Setting Password
- 1.63.Modify Device Advanced Setting Password
- 1.64.Modify Device Web Interface Password
- 1.65.Modify Browser Password
- 1.66.PBX Configuration on The Device
- 1.67.PBX Configuration on The Web Interface
- 1.68.Reboot
- 1.69. Reset
Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
51
Preferred Outbound Proxy Server: enter the SIP address of the outbound
proxy server.
Preferred Outbound Proxy Port: Enter the Port number for establish call
session via the outbound proxy server.
Alternate Outbound Proxy Server: set up Backup Server IP for the backup
outbound proxy server.
Alternate Outbound Proxy Port: enter the Port number for establish call
session via the backup outbound proxy server.
1.27.SIP Call DND & Return Code Configuration
DND (Do not disturb) setting allows you not to be disturbed by any unwanted
incoming SIP calls. You can set up DND related parameters properly on the
device web Phone > Call Feature > DND interface to block SIP calls you do
not intend to answer. In the mean time, you can also define the code to be
sent to the SIP server when you want to reject the call.
Parameter Set-up:
DND: check Whole Day or Schedule to enable the DND function. DND
function is disabled by default.
Return Code When DND: select what code should be sent to the calling
device via SIP server. 404 for “Not found”; 480 for “ Temporary
unavailable”; 486 for “busy here”.
Schedule
：
enable DND schedule for your indoor monitor. To configure a
specific time to enable DND feature. If you choose Schedule for DND, the
Whole Day tab is available.