Product Info
Table Of Contents
- 1.1.Device Start-up Network Selection
- 1.2.Device Home Screen Type Selection
- 1.3.Accessing the Device Setting on the Device
- 1.4.Access the Device Setting on the Web Interface
- 1.5.Language Setting
- 1.6.Time Setting
- 1.7.Screen Display setting on the Device
- 1.8.Screen Display Setting on the Web Interface
- 1.9.Screensaver Configuration
- 1.10.Upload Wall Paper
- 1.11.Status Bar
- 1.12.Upload Device Booting Image
- 1.13.Icon Screen Display Configuration
- 1.14.Volume Configuration
- 1.15.Phone Book Configuration on the Device
- 1.16.Phone Book Configuration on the Web Interface
- 1.17.Device Network Configuration
- 1.18.Device Deployment in Network
- 1.19. Device NAT Setting
- 1.20. Device Bluetooth Setting
- 1.21.Device Wi-Fi Setting
- 1.22.IP call & IP Call Configuration
- 1.23.SIP Call &SIP Call Configuration
- 1.24.SIP Account Registration
- 1.25.SIP Server Configuration
- 1.26.Outbound Proxy Server configuration
- 1.27.SIP Call DND & Return Code Configuration
- 1.28.Device Local RTP configuration
- 1.29.Data Transmission Type Configuration
- 1.30.Call Setting
- 1.31. Intercom Call Configuration
- 1.32.PTime Configuration
- 1.33.SIP Hacking Protection
- 1.34.Emergency Call Setting
- 1.35.RF Setting (Optional)
- 1.36.Multicast Configuration
- 1.37.Call Forwarding Setting
- 1.38.Manage Messages
- 1.39. Configure Voice Message (MWI)
- 1.40.Audio Codec Configuration
- 1.41.Video Codec Configuration
- 1.42.Monitor and Image
- 1.43.Alarm and Arming Configuration
- 1.44.Screen Unlock Setting
- 1.45.Voice Encryption
- 1.46.Remote Control
- 1.47.Relay Switch Setting
- 1.48.Web Relay Setting
- 1.49.Door Unlock Configuration
- 1.50.Configure Lift Control
- 1.51.Configure Lift Control Prompt
- 1.52.Provisioning Principle
- 1.53.Introduction to the Configuration Files for Auto-P
- 1.54.Autop Schedule
- 1.55.DHCP Provisioning Configuration
- 1.56.Static Provisioning Configuration
- 1.57.System Log for Debugging
- 1.58. PCAP for Debugging
- 1.59. User Agent
- 1.60.Enter Applications Screen
- 1.61. Install Third-party App
- 1.62.Modify Device Basic Setting Password
- 1.63.Modify Device Advanced Setting Password
- 1.64.Modify Device Web Interface Password
- 1.65.Modify Browser Password
- 1.66.PBX Configuration on The Device
- 1.67.PBX Configuration on The Web Interface
- 1.68.Reboot
- 1.69. Reset
Android Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
42
1.18.Device Deployment in Network
Akuvox IT82A indoor monitors should be deployed
before they can be properly configured in the network environment in terms
of their location, operation mode, address and extension numbers as
opposed to other devices for device control and the convenience of the
management. To deploy the device in the network on web Network >
Advanced > Connect Setting interface.
Parameter Set-up:
Connect Mode: It is automatically set up according to the actual device
connection with a specific server in the network such as SDMC or Cloud
and None. None is the default factory setting indicating the device is not
in any server type, therefore you are allowed to choose Cloud, SDMC in
discovery mode.
Discovery Mode: to turn on the discovery mode of the device so that it
can be discovered by other devices in the network, and disable if you
want to conceal the device so as not to be discovered by other devices.
Device Node: specify the device address by entering device location info
from the left to the right: Community, Unit, Stair, Floor, Room in sequence.
Device extension: enter the device extension number for the device you
installed.
Device Location: enter the location in which the device is installed and
used.