User Guide

4.4. Armingsettings
①Press this icon to enter zone settings interface.
② To choose a zone to set corresponding parameters.
IT82A(869) support up to 8 zones, you can connect up to 8
alarm sensors to IT82A(869).
③Configure the location of the alarm sensor, including Gate,
Door, Bedroom, Guest room, Hall, Window, Balcony, Kitchen,
Study and Bathroom.
④Configure the type of the alarm sensor, including Infrared,
Drmagnet, Smoke, Gas, Urgency.
⑤ Configure the trigger mode of the alarm sensor, including
NC(Normal Close) and NO(Normal Open).
Note: SIP account is provided by SIP server. Please consult your
administrator for SIP Server information.