User Guide

59
C317X
Admin Guide
Location: To select which location the detection device is in,
including Bedroom, Guest room, Hall, Window, Balcony, Kitchen,
Study and Bathroom.
Type: To select which type of detection device is, including
Infrared, Drmagnet, Smoke, Gas and Urgency..
Trigger Mode: To setup triggering mode for the sensor, including
NO (normal open) and NC (normal closed).
Alarm Status: To setup status of alarm sensor, including enable,
disable and 24H.
Note: Disable status of detector means it cannot be triggered,
24H status means it cannot be disabled. Enable status means it
depends on arming mode.
4.4.2. Motion Detector
Users could choose to display Motion Detector on the
home/more page, please refer to chapter 3.4.10. C317X could
Figure 4.4.2-1 Motion detection