C317 Series Indoor Monitor Admin Guide
About This Manual Thank you for choosing Akuvox’s C317series indoor monitor. This manual is intended for end users, who need to use and configure the indoor monitor. This manual provides an introduction of all functions and features of the product. It is suitable for 83.31.2.3xx version. Please visit Akuvox forum or consult technical support for any new information or latest firmware. Note: Please refer to universal abbreviation form in the end of manual when meet any abbreviation letter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Content 1. Product Overview ........................................................................................................................................................................... 1 1.1. Product Description ................................................................................................................................................................. 1 1.2. Connector Introduction .............................................................................................
2.4.1. Checking the Monitor ................................................................................................................................................... 10 2.5. Message ............................................................................................................................................................................... 11 2.5.1. Text Message..........................................................................................................................
3.3.1. System Code Modification ........................................................................................................................................... 18 3.3.2. Setting Code Modification ............................................................................................................................................ 19 3.3.3. Web Password Modification ...............................................................................................................................
3.4.5. Display Settings ........................................................................................................................................................... 27 3.4.6. Sound Settings ............................................................................................................................................................ 28 3.4.7. Door Bell Sound ............................................................................................................................
3.6.5. SIP Server ................................................................................................................................................................... 39 3.6.6. Outbound Proxy Server ............................................................................................................................................... 39 3.6.7. Transport Type .................................................................................................................................
4.1.2. Discovery setting ......................................................................................................................................................... 50 4.2. Intercom ................................................................................................................................................................................ 51 4.2.1. Call Forwarding .................................................................................................................
4.4. Security ................................................................................................................................................................................. 58 4.4.1. Arming Zone Setting .................................................................................................................................................... 58 4.4.2. Motion Detector ...................................................................................................................
C317X Admin Guide 1. Product Overview 1.1. Product Description C317X is an Android SIP-based with smooth touch-screenindoor monitor. It can be connected with Akuvox door phone for audio/video communication, unlocking and monitoring. Residents can communicate with visitors via audio/video call, and it supports to unlock the door remotely. It is more convenient and safer for residents to check the visitor’s identity through its video preview function.
C317X Admin Guide 1.2. Connector Introduction Ethernet(POE):Ethernet (POE) connector which it can provide both power and network connection. RJ45 (PON): Share the network access from Ethernet (POE) port, and for PC and other equipments connection. 12V/GND: External power supply terminal if POE is not available. Figure 1.2-1 C317X interface RS485A/B: RS485 terminal. Bell/GND: Connect a simple two-wire door bell. Relay A/B (NO/COM/NC): Relay control terminal.
C317X Admin Guide 2. Daily Use 2.1. Starting When booting C317X first time, users need to choose a suitable Figure2.2.1-1 Network selection way to connect to network,wireless or wire. To choosea proper device mode according to specific application scenarios. C317X supports 3 modes, including Cloud,Discovery Figure 2.1-1 Network selection andSDMC. It only pop up Cloud Mode and Discovery Mode for users choosing. Tap Skip if usersare adopting SDMC mode.
C317X Admin Guide manual operations. This mode do not need to be done any configurations previously by the administrator. Cloud mode: Akuvox Cloud is an all in one management system. Akuvox Cloud is the mobile service that allows audio, video, remote access control between smart phones and Akuvox intercoms. All configurations in the device will be issued automatically from cloud. If users decide to use Akuvox cloud, please contact administrator, who will help to configure related settings before using.
C317X Admin Guide 2.2. Making a Call There are 6 ways to establish VOIP callsby C317X. 2.2.1. Calling from Call List In the home page, choose a number from Call List to make a call. Scroll up or down the Call List to choose the contact that users want to call. Figure 2.2.1-1 Call from call list Note: In Cloud or SDMC mode, the Call List of C317X will be issued from the system. 2.2.2.
C317X Admin Guide Tap All Call icon to call other indoor monitors which are set in the same multicast group. 2.2.3. Calling from Missed Call In the home page, missed call indicates how many calls that users missed (1 missed call for an example). Missed call could be treated as a brief call log. Tap Missed Call icon ① to view the calls that were not Figure 2.2.3-1 Call from miss call answered before. Choose the contact on the call list ② which users want to call out.
C317X Admin Guide 2.2.4. Calling from Device It will display the devices connected with C317X on the contact interface. On the device, go to More - Contact. Click Update ① to synchronous the contact automatically. Choose a device ② which users want to call. Choose Audio ③ or Video④ mode to call out. Note: Only under Discovery mode, users need to press Update key Figure 2.2.4-1 Call from device manually. 2.2.5.
C317X Admin Guide Choose Audio ③ or Video ④ mode to call out. 2.2.6. Calling from Keypad On the device, go to More - Call to get access to keypad. Click account icon ① above the keypad to switch accounts to make a call. Input the SIP account /IP address to the keypad ② to call the corresponding devices or soft phone. Figure 2.2.6-1 Call from keypad Choose Audio ③ or Video ④mode to call out. 2.3. Receiving a Call 2.3.1.
C317X Admin Guide Tap Cancel to reject the incoming call. Press “+” or “-” of the volume on the right side to adjust the ring tone volume. 2.3.2. During the session Tap Unlock to open the corresponding door (if the call is from outdoor unit). Tap Capture to take a screen shot of current interface. Tap Mute to eliminate the voice on C317X’s side. Tap Switch to switch from video call to audio call or vice versa. Tap Cancel to hang up the current call. Figure 2.3.2-1 During session 2.
C317X Admin Guide 2.4.1. Checking the Monitor Choose the outdoor devices from the list. The real-time video from the door phone or IP camera will show in the screen. PressUnlock to open the door which is connected with door phone. Press Captureto take a screen shotof current interface. Press Cancel to exit the monitoring. Figure 2.4.1-1 Live view list PressList button inthe bottom right corner to wake the outdoor video list.
C317X Admin Guide 2.5. Message Message① indicates how many messages are unread(An unread message for an example). Or directly enter the message interface to manage. 2.5.1. Text Message Tap Message ① on the main interface to view the unread Figure2.5 -1 Message message. Tap the unread message ② to view the message in details. Figure 2.5.
C317X Admin Guide 2.5.2. Creating a Message Press New key ① to create a new message. Enter the destination number manually②orchoose the contact from the contact list③or select the device quickly from the below list ④. Choose the frequentlyused message⑤ , such as “Hello,” “Help.” Or input the message content which users want to send Figure2.5.2-1 Create message ⑥. PressSend key ⑦to send. Figure2.5.
C317X Admin Guide 2.5.3. Deleting a Message Long press the message ① to select it. Click Select All ② to select all message in the message lists. Click Delete ③ to delete the messages have been selected. Click Cancel ④ to cancel the operation. Click Back icon ⑤ to exit the message interface. Figure2.4.
C317X Admin Guide 2.6. Arming Tap Arming to enter the Arming interface. Arming feature is not displayed by default. Users can ask administrator to enable it. Please refer to chapter 3.4.10. C317X supports 4 modes, including Home mode, Night mode, Away mode and Disarmed mode. Figure2.6-1 Arming 2.6.1. Arming Mode Go to Arming- Arming mode. Users can see all of the 8 zones andcorresponding sensor types. Slide down to check more informationin this interface. Adjust Defence delay time.
C317X Admin Guide there will be 90 seconds delay time to announce the notification. TheStatus in the corresponding zone means whether the zone is available or not. Press Save in the top right corner to save the modification. 2.6.2. Disarm Code Go toArming - Disarm Codeto enter the disarm code settings interface. Users can modify the disarm code here. Enter the original disarm code ①first, and it is 0000 by default. Enter the new disarm code②.
C317X Admin Guide 2.6.3. Alarm Log Go to Arming - Alarm Log to enter the alarm log interface. Users can check the alarm log, including“location,”“zone,”“zone type” and “alarm time.” Hold an alarm log① and it will show up delete prompt. Press Select All②to delete all alarm log or select a part of Figure2.5.3-1Alarm log existed messages then click Delete ③. Figure 2.6.3-1 Alarm log PressCancel ④ to cancel to deletion. 2.6.4. Status Go to Arming interface.
C317X Admin Guide 3. Basic Features 3.1. Accessing the System Settings 3.1.1. Advanced System Setting On the device, goto More-Settings-More (Default password is Figure3.1-1 System setting 123456) to accessadvancedsystem settings. The latter More interface have more advanced features’ settings. 3.2. Accessing the Website Setting 3.2.1. Obtaining IP address On the device, go toMore-System Info-Network to check the device’s IP address. Figure3.2.
C317X Admin Guide 3.2.2. Accessing the Device Website Type the device’s IP address on browser, and input default user name and password: admin/admin to access the web interface. Note: The recommended browser is Google Chrome. 3.3. Password Modification Figure3.2.2-2Login web 3.3.1. System Code Modification On the device, go to More - Settings - More - System Code. System code is used to enter higher level More interface, and the originalsystem code ① is 123456.
C317X Admin Guide 3.3.2. Setting Code Modification On the device, go to More - Settings - More - Setting Code. Setting code is used to enter “Setting interface,” and the original setting code①is null. Administrator can edita new setting code ② to prevent someone from entering the setting interface, and then confirm the new one ③ and click submit ④to save. 3.3.3. Web Password Modification Figure3.3.2-1 Setting code Access the website, go to Security-Basicto modify the default website password “admin.
C317X Admin Guide 3.4. Phone Configuration 3.4.1. Language On the device, go to More - Settings - Language to choose a suitable phone screen display language, and it is English by default. In the website,go to Phone - Time/Lang to select a web language, and it is English by default. Figure 3.4.1-1 Phone language 3.4.2. Time On the device, go to More - Settings - Time to enter the time setting interface. Automatic Date Time: Tick to enable NTP server. Set Date: To set the date manually.
C317X Admin Guide Date Format: To select different date format. NTP Server: To fill in the NTP server to get time automatically. On the web portal, go to Phone - Time/Lang. Time Zone: To select which time zone user is in. Primary Server: To fill in NTP server to get time automatically. Figure 3.4.2-1 Time setting Figure 3.4.
C317X Admin Guide 3.4.3. Network 3.4.3.1. Network Status On the device, go to More - System Info - Network. Users could check the basic network status from this interface, including access mode, IP address parameters and so on. On the web portal, go to Status - Basic - Network Information to Figure3.4.3.1-1 Network info check network information. Figure3.4.3.
C317X Admin Guide 3.4.3.2. Network Settings On the device, go to More - Settings - More - Network. DHCP: Tick the DHCP option to configure the network as DHCP mode, and then C317X will obtain the IP address, and other network parameters automatically. Static IP: Fill in the parameters of LAN IP, subnet mask, gateway, pri DNS server and sec DNS server manually. Figure 3.4.3.2-1 Wire network setting On the web portal, go to Network - Basic to configure the network settings. Figure 3.4.3.
C317X Admin Guide 3.4.3.3. WIFISetting (optional) On the device, go to More - Settings - More - WiFi to enable the WIFI feature, choose the suitable AP (Access point), and thenenter the password to connect to it. 3.4.3.4. Local RTP On the web portal, go to Network - Advanced - Local RTP. Figure3.4.3.3-1 Wireless network Starting RTP Port:To determine the minimum port for RTP stream. Max RTP Port:To determine the maximum port for RTP stream. 3.4.4. Bluetooth (optional) Figure 3.4.3.
C317X Admin Guide 3.4.4.1. Turning Bluetooth On /Off In the device, go to the More - Settings -Bluetooth, click On to enable the bluetooth. 3.4.4.2. Changing Bluetooth Device Name The IT83A/W uses “rk312x” as Bluetooth device name by default. The device name will be visible to other devices when connecting them. In the device, click top right corner ,choose “Rename this device” to modify the device name, click RENAME to save. 3.4.4.3.
C317X Admin Guide Click PAIR in the prompt windows in both sides. The Device will be connected successfully. 3.4.4.4. Transfer By bluetooth After connection, users can choose bluetooth to transfer and receive some files. And user can check the received file in the top right corner “Show received files”. 3.4.4.5. Unparing the Bluetooth Device Click the connected device. Click OK in the prompt windows. The Device will be disconnected successfully. Figure 3.4.4.
C317X Admin Guide 3.4.5. Display Settings On the device, go to More - Settings - Display. Brightness: To adjust the brightness which is 145 by default. The range is from 0 to 255. The bigger value means the brighter screen. Sleep: To configure the sleep delay which is 1 minute by default. If there is no any operation in 1 minute, it will turn to sleep screen. Screen Saver Lock Time: To configure the time to make it display sleep screen when it is in screen savor mode.
C317X Admin Guide Screen Clean:Press screen clean to clean the screen, and it will keep users from misusing. Font Size: To adjust the size of words which is displayed on the screen. 3.4.6. Sound Settings On the device, go to More - Settings - Sound. Ring Volume: To set ring volume for incoming calls. Talk Volume: To set talk volume during the call. Tone Volume: To set tone volume. Ring Tones: To set different ring tones for incoming call.
C317X Admin Guide Upload: To choose the suitable sound file from the local folder. Click Import to save. Please note the tip about the sound file format. Sound File: Choose one sound file from imported sound files before. 3.4.8. DND The full name of DND is Do Not Disturb. It allows C317X to ignore any incoming calls. On the device home screen, tap the DND to able or disable DND function. On the web portal, go to Phone - Call feature - DND. DND: Enable or disable this function. Figure 3.4.
C317X Admin Guide configured, C317X will send a SIP message to server to turn on DND on server side if users press DND when DND is off. DND Off Code:The code is used to turn off DND on server’s side, if configured, C317X will send a SIP message to server to turn off DND on server side if users press DND when DND is on. 3.4.9. Capture On the device, go to More - Settings - Call Feature.
C317X Admin Guide Users are able to upload the logo picture, C317X will display the logo when powering up. Click Reset to reset the boot logo to original one. 3.4.11. Key Set of C317X Monitor On the web portal, go to Phone - Key/Display. Users can customize the feature icon display, to choose which feature will be shown and where it will be displayed. Type: To select which function shall be displayed on the home page or more page.
C317X Admin Guide screen, the type shall be chosen as “Custom APK” and fill in the value with corresponding package name and class name. Example: To view the display example of C317X on home page interface or more interface. 3.5. Local PhoneBook 3.5.1. Adding a Contact On the device, go to More - Contacts - LocalPhoneBook. Enter Contact interface, and then press + symbol ① to add new contact. Type in new contact name ② .
C317X Admin Guide IP/live/ch00_0. Tap Cancel ⑥ to cancel the operation or press Confirm ⑤ to make changes to the contact setting. 3.5.2. Editing a Contact On the device, go to More - Contacts - Local PhoneBook to enter contact interface, and select one existed contact. Press Edit icon ① to modify the exited contact. Press Delete icon ② to delete a existed contact. On the web portal PhoneBook - Local Book, users can also do some modification about contact.
C317X Admin Guide 3.5.3. Contact Import/Export Import/Export: To import or export the contacts in bulk, please make sure the format is correct. Figure3.5.3-1 Import/Export contact 3.5.4. Black List On the device, go to More - Contact - LocalPhoneBook - Black List. Click All Contacts ① to switch the local phone book from all contacts to black list or vice versa. Press + ② to add number into black list. Click phone book icon ③ to view the existing contacts in local phone book.
C317X Admin Guide Tap Confirm ⑥ to add contacts into black list. Tap Cancel ⑦ to cancel the operation. On the web portal, PhoneBook - Local Book - Contact - Blacklist. User can also do some configurations. Contact: To display black list or all contact. Search: To search the contact by entering number or name. Dial: To dial out the number that users have filled in. BlackList Setting: To add new contact to black list. Figure3.5.
C317X Admin Guide 3.6. Intercom Call Figure3.6.1-1 IP call switch 3.6.1. IP Direct Call Without sip server, users can also use IP address to call each other, but this way is only suitable in the LAN. On the web portal, go to Phone - Call Feature - Others - Direct IP to enable the direct IP function. Enter the IP address of the caller, and then press Audio Call or Video Call to make a call. Figure3.6.1-2Direct IP call 3.6.2.
C317X Admin Guide 3.6.3. Account Status On the device, go to More - System Info - Account. Users could check the basic SIP account status here, registered means it is ready for using. On the web portal, go to Status - Account information to check the basic information of SIP account. Figure3.6.3-1 Account status Figure3.6.
C317X Admin Guide 3.6.4. SIP Account On the device, go to More - Settings - More - Account. Active: To activate SIP account. Label: To enter the label name of this account, which will show on the account status interface. Display Name: To enter the display name of this account, which will show on other devices when making calls. Figure3.6.4-1 SIP account Register Name: To enter the number registered onto SIP server. User Name: To enter the extension number registered onto SIP server.
C317X Admin Guide 3.6.5. SIP Server Enter the SIP account address which points to the sip server. Server IP: To enter SIP server’s IP address or URL. Port: The specified port number for the sip server. Registration Period: The registration will expire after registration period, and C317X will re-register automatically within registration period. Figure 3.6.5-1 SIP server On the web portal, go to Account - Basic to check the information of SIP account in details. 3.6.6. Outbound Proxy Server Figure 3.6.
C317X Admin Guide Outbound Proxy Server: To configure the proxy server to receive all initiating request messages and route them to the designated SIP server. 3.6.7. Transport Type On the web portal, go to Account - Basic to setup transport type. Figure3.6.7-1 Transport type UDP: UDP is an unreliable but very efficient transport layer protocol. TCP: Reliable but less-efficient transport layer protocol. TLS: Secured and reliable transport layer protocol.
C317X Admin Guide Note: Auto answer is only available with SIP accounts. On the web portal, go to Phone - Call Feature to setup auto answer whitelist. It will auto answer the incoming calls when the caller is in white list. Figure3.6.8-2 Whitelist setting Device Location: To enter the device name /location. SIP/IP: To enter the SIP /IP number of the corresponding devices. Auto Answer WhiteList: To display the SIP /IP number stored in Figure3.6.8-3 Whitelist setting display C317X’s white list.
C317X Admin Guide Call Number:To setup 3 SOS numbers. Once users press SOS key on the home page (SOS display key shall be set on the web manually), C317X will call out the number in order. Call Timeout: Setup the timeout for each number. Once users call out, if the other side will not answer within the timeout, C317X will continue to call the next number. Loop Times: To setup the call loop times. 3.6.10. Multicast Multicast function could only be applied among indoor monitors.
C317X Admin Guide Multicast List: To fill in the parameters of multicast group. C317X will establish multicast calls to other indoor monitors which are set in multicast group. Listen List: To fill in the parameters of listen group. C317X will receive multicast calls if some indoor monitors call the listen group. Figure3.6.10-3 Multicast group Label: To show the label name on the calling interface if users establish all call. 3.7. Security 3.7.1.
C317X Admin Guide Number: To enter the IP address/SIP number of the corresponding camera. Enter the RTSP or ONVIF URL of the door phone or IP camera. Doorphone ID/Device Name: To enter the ID number of doorphone, which could be set by users. RTSP Address/Destination URL: To set the RTSP URL for the door phone. The RTSP format of Akuvox door phone is rtsp://device IP/live/ch00_0. User Name: To enter the user name if required. Password: To enter the password if required. Figure3.7.
C317X Admin Guide 3.8. Access control 3.8.1. Face ID On the device, go to More - Settings - More - Face ID to setup face ID to access to C317X, which provides setting security. To implement face ID feature on C317X, the Screen Lock on display setting interface should be enabled first. The whole process is actually self-explanatory, follow the indication to record users’ face ID to C317X. When screen lock is enabled, users could choose face ID or password (System code) to enter C317X. 3.8.2.
C317X Admin Guide Go to Phone-Relayto setup the DTMF code of local relay in website.Users can press the Unlock key during the call. Relay Delay: To set the delay time for local relay. Status: To enable or disable the softkey in talking page. Display Name: To modify the display name of unlock icons in Figure3.8.2-2 Relay display talking page. Relay: To set the relay type, including local relay 1/2, remote relay HTTP and remote relay DTMF. 3.8.3.
C317X Admin Guide 3.8.4. Reboot On the device, go to More - Settings - Reboot. Click the Reboot icon to reboot the device. One the web portal Upgrade - Basic - Reboot, users can also reboot the device. Figure3.8.4-2 Web reboot 3.8.5. Reset On the device, go to More - Settings - More. Reset To Factory Setting: Reset all data to factory settings. Reset Config To Factory Setting:Reset all configurations (in the directory /data/data/config) which only be used by C317X to factory settings.
C317X Admin Guide On the web portal Upgrade - Basic, users can also store the device. Figure3.8.5-2 Web reboot 4. Advanced Features 4.1. Phone Configuration 4.1.1. Installing Custom APK Figure 4.1.
C317X Admin Guide to their own application. On the web portal, go to Upgrade Key/Display. Package Name: To fill in the package name of APK (For example: com.akuvox.mobile.smartplus). APP Class Name: To fill in the class name of APK (For example: com.akuvox.mobile.module.main.view.SplashActivity). Start Up Enable: To choose whether APK should start up automatically when power up. Turn Back Apk Enable: To choose whether turn back APK without operating for some interval.
C317X Admin Guide 4.1.2. Discovery setting If Discovery mode is adopted, users don’t need to configure the devices by themselves. C317X will scan automatically all types of the devices on the same discovery node. On the device, go to More - Settings - More to configure the discovery mode and location name. Discovery Node/Device Address: To indicate the locations of the device (For example, device address 1.1.1.1.1 means that this device is located in Figure 4.1.
C317X Admin Guide 4.2. Intercom 4.2.1. Call Forwarding On the device, go to More - Settings - Call Feature. Account: To choose which account shall implement call forwarding feature. Always forward: All the incoming calls will be forwarded unconditionally to a specified number. Busy Forward: The incoming calls will be forwarded to a specified number when C317X is busy. No answer Forward: The incoming calls will be forwarded to a specified number when the ring tone is time out without answering.
C317X Admin Guide On/off Code: The code used to turn on/off forward feature on server’s side, if configured, C317X will send a sip message to server to turn on/off forward feature on server side if users press forward when forward feature is off/on. On the web portal, go to Phone - Call Feature，users can also setup it. 4.2.2. Intercom Intercom: To allow users establishing a call directly with the callee. Active: To enable or disable Intercom function. Figure 4.2.
C317X Admin Guide MWI Subscribe: To enable or disable message waiting indicator function. MWI Subscribe Period: To setup the time of MWI function. Voice Mail Number: To fill in the voice mail number. 4.2.4. Audio Codec On the web portal, go to Account - Advanced. Audio Codecs: To configure the disabled codecs and enabled codecs by pressing the corresponding buttons. Codec means Figure 4.2.4-1 Audio codes coder-decoder which is used to transfer analog signal to digital signal or vice versa. 4.2.5.
C317X Admin Guide Codec Resolution: To adjust the resolutions for different video codecs. Codec Bitrate: To adjust the bitrate for different video codecs. Codec Payload: To adjust the codec payload for video codec. 4.2.6. NAT On the web portal, go to Account - Advanced. UDP Keep Alive Message:To send UDP keep alive message Figure 4.2.6-1 NAT periodically to router to keep NAT port alive if enabled. UDP Alive Msg Interval:To Keepalive message interval.
C317X Admin Guide User Agent: To customize user agent field in the SIP message. If user agent is set to specific value, users could see the information from SIP message. If user agent is not set by default, users could see the company name, model number and firmware version from SIP message. 4.2.8. DTMF On the web portal, go to Account - Advanced. DTMF: To configure RTP audio video profile for DTMF and its Figure 4.2.8-1 DTMF payload type. Type: Support Inband, Info, RFC2833 or their combination.
C317X Admin Guide Voice Encryption(SRTP): If enabled, all audio signal (It’s RTP streams indeed) will be encrypted for more security. 4.2.10. Call Related Max/Min Local Sip Port:To configure maximum /minimum local SIP port for designated account. PTime:Interval time between two consecutive RTP packets. Prevent SIP Hacking:Enable to prevent SIP from hacking in the Figure 4.2.10-1 Call related Internet. 4.2.11. Remote Control On the web portal, go to Phone - Call feature. Figure 4.2.
C317X Admin Guide Allowed Access IP List: To configure the IP address of allowed host. 4.2.12. Session Time Out Session Time Out: To set the time out value, the ongoing call will Figure 4.2.12-1 Session time out be disconnected automatically if session time out. 4.3. Access Control 4.3.1. Web Relay Figure 4.3.1-1 Web relay On the web portal, go to Phone - Relay - Webrelay. IP Address: To fill in the IP address of web relay. UserName: To fill in the user name of the web relay.
C317X Admin Guide 4.3.2. Remote Relay by HTTP On the web portal, go to Phone - Relay. Remote Relay By HTTP: To configure the parameters to trigger a Figure3.9-1 Remote relay by HTTP certain remote relay of door phone by sending http message, which also requires the configurations on door phone. 4.4. Security 4.4.1. Arming Zone Setting On the device, go to More - Settings - More - Arming. Arming function is very useful for home safety.
C317X Admin Guide Location: To select which location the detection device is in, including Bedroom, Guest room, Hall, Window, Balcony, Kitchen, Study and Bathroom. Type: To select which type of detection device is, including Infrared, Drmagnet, Smoke, Gas and Urgency.. Trigger Mode: To setup triggering mode for the sensor, including NO (normal open) and NC (normal closed). Alarm Status: To setup status of alarm sensor, including enable, disable and 24H.
C317X Admin Guide receive the captured motion pictures from the door phone, which requires the configurations on door phone. 4.5. Upgrade 4.5.1. Basic Upgrade Figure 4.5.1-1 Basic upgrade On the web portal, go to Upgrade - Basic. Firmware Version: To display the firmware version at present. Hardware Version: To display the hardware version at present. Upgrade: To select the upgrading file from PC manually. Submit: To submit the upgrading file to C317X. Cancel: To cancel submitting the upgrading file.
C317X Admin Guide 4.5.2. Autop Autop (Auto-Provisioning), this feature is used to configure or upgrade C317X in batch via the support of third party servers. To use DHCP/PNP/TFTP/FTP/HTTP/HTTPS servers to get URL, and then download firmware and/or its corresponding configuration files from servers. These configuration files and firmware will be used to update firmware and the corresponding parameters on the phone. 4.5.2.1.
C317X Admin Guide 4.5.2.2. DHCP Autop DHCP Option:To use designated DHCP option to get auto provisioning server’s address via DHCP. 4.5.2.3. Manual Autop Figure 4.5.2.2-1 DHCP option Manual Autop:To display and configure manual update server’s settings. URL: To fill in the Auto provisioning server address. User Name:To fill in the user name if server needs an username to access, otherwise left blank. Password: To fill in the password if server needs a password to access, otherwise left blank.
C317X Admin Guide AES Key (MAC): Used for IP phone to decipher MAC-oriented auto provisioning configuration file(For example, file name could be 0C1105888888.cfg if C317X’s MAC address is 0C1105888888). Notes:AES is one of many encryption, it should be configured only when configure file is ciphered with AES, otherwise left blank. 4.5.2.4. Automatic Autop Automatic Autop:To display and configure auto provisioning mode settings. It is actually self-explanatory.
C317X Admin Guide 4.6. Logs 4.6.1. Call log On the web portal, go to PhoneBook - Call Log. Users are able to view all /dialed /received /missed /forwarded calls. Call History: To select which kind of calls users want to view, including dialed, received, missed and forwarded. Export: To export the call log. 4.6.2. System Log On the web portal, go to Upgrade - Advanced. System log provides a professional method for administrator to debug . Figure 4.6.
C317X Admin Guide Export Log:To export temporary system log file to local PC. Remote System Log: To enable/disable remote system Log. Remote System Server: To input the syslog server address. 4.6.3. PCAP On the web portal, go to Upgrade - Advanced - PCAP. PCAP is a network packet capture tool in C317X itself, which provides an efficient method to troubleshoot network problems. PCAP Start: To start PCAP if users click Start button. PCAP Stop: To stop PCAP if users click Stop button.
C317X Admin Guide Abbreviations ACS:Auto Configuration Server DNS-SRV:Service record in the Domain Name System Auto:Automatically FTP: File Transfer Protocol AEC:Configurable Acoustic and Line Echo Cancelers GND: Ground ACD:Automatic Call Distribution HTTP: Hypertext Transfer Protocol Autop:Automatical Provisioning HTTPS: Hypertext Transfer Protocol Secure AES:Advanced Encryption Standard IP: Internet Protocol BLF:Busy Lamp Field ID: Identification COM:Common IR: Infrared CPE:Customer Premi
C317X Admin Guide PCAP: Packet Capture SIP: Session Initiation Protocol PNP: Plug and Play SNMP: Simple Network Management Protocol RFID: Radio Frequency Identification STUN: Session Traversal Utilities for NAT RTP: Real-time Transport Protocol SNMP: Simple Mail Transfer Protocol RTSP: Real Time Streaming Protocol SDMC: SIP Devices Management Center MPEG: Moving Picture Experts Group TR069: Technical Report069 MWI: Message Waiting Indicator TCP: Transmission Control Protocol NO: Normal Opened
C317X Admin Guide Contact us For more information about the product, please visit us atwww.akuvox.com or feel free to contact us by Sales email: sales@akuvox.com Technical support email: techsupport@akuvox.com Telephone: +86-592-2133061 ext.7694/8162 We highly appreciate your feedback about our products.
