User's Manual


2
C315W
User Manual
1.2. Power connection
Ethernet(POE): Ethernet(POE) connector which can provide both
power and network connection.
RJ45(PON): This is a special connector to provide power and
network for E10 series.
12V/GND: External power supply terminal if POE is not available.
RS485-A/B: RS485 terminal.
Bell/GND: Connect a simple two-wire door bell.
RelayA/B (NO/COM/NC): Relay control terminal.
IO1-IO8/GND: Connect with different alarm detector for 8 security
zones.
Note: The general indoor monitor interface diagram is only for
reference.
Figure 1.2-1 interface
Figure 1.2-2 General interface