Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronics2-Wire Intercom

Table Of Contents

1.Product Overview
2.Change Log
3.Introduction to Configuration Menu
4.Access the Device
- 4.1.Device Start-up Selection
- 4.2.Device Home Screen Type Selection
- 4.3.Accessing the Device Setting on the Device
  - 4.3.1.Accessing Device Basic Setting.
  - 4.3.2.Accessing Device Advanced Setting
- 4.4.Access the Device Setting on the Web Interface
5.Language and Time Setting
- 5.1.Language Setting
  - 5.1.1. Language Setting on the Device
  - 5.1.2. Language Setting on the Web Interface.
- 5.2.Time Setting
  - 5.2.1.Time Setting on the Device
  - 5.2.2.Time Setting on the Device Web Interface
    - 5.2.2.1.Time Setting on the Device Web Interface
    - 5.2.2.2.Daylight Saving Time Setting
6.Screen Display Configuration
- 6.1.Screen Display setting on the Device
- 6.2.Screen Display Setting on the Web Interface
- 6.3.Screensaver Configuration
- 6.4.Upload Device Booting Image
- 6.5.Upload Web interface logo
- 6.6.Icon Screen Display Configuration
7.Sound and Volume Configuration
- 7.1.Volume Configuration
  - 7.1.1. Configure Volume on the Device
  - 7.1.2.Configure Volume on the Web Interface
8.Phone Book Configuration
- 8.1.Phone Book Configuration on the Device
- 8.2.Phone Book Configuration on the Web Interface
9.Network Setting
- 9.1.Device Network Configuration
  - 9.1.1.Configuring Network Connection on the Device
  - 9.1.2.Configuring Device Network Connection on the Web I
- 9.2.Device Deployment in Network
- 9.3. Device NAT Setting
- 9.4.Device Wi-Fi Setting
- 9.5.VLAN Setting
10.Intercom Call Configuration
- 10.1.IP call & IP Call Configuration
- 10.2.SIP Call &SIP Call Configuration
- 10.3.SIP Account Registration
- 10.4.SIP Server Configuration
- 10.5.Outbound Proxy Server configuration
- 10.6.SIP Call Configuration
- 10.7.Device Local RTP configuration
- 10.8.Data Transmission Type Configuration
- 10.9.Call Setting
  - 10.9.1.Call Auto-answer Configuration
  - 10.9.2.Auto-answer Allow List setting
- 10.10. Intercom Call Configuration
- 10.11.SIP Hacking Protection
- 10.12.Emergency Call Setting
- 10.13.Multicast Configuration
- 10.14.Call Forwarding Setting
  - 10.14.1.Call Forwarding Configuration on the Device
  - 10.14.2.Call Forwarding Configuration on the Web Interface
11.Intercom Message Setting
- 11.1.Manage Text Messages
- 11.2.Manage Voice Message
12.Audio& Video Codec Configuration for SIP Calls
- 12.1.Audio Codec Configuration
- 12.2.Video Codec Configuration
13.Security
- 13.1.Monitor and Image
- 13.2.Alarm and Arming Configuration
- 13.3.Screen Unlock Setting
  - 13.3.1.Screen Unlock by PIN Code
- 13.4.Client Certificate Setting
  - 13.4.1.Web Server Certificate
  - 13.4.2.Client Certificate
- 13.5.Power Output Setting
14.Door Access Control Configuration
- 14.1.Relay Switch Setting
  - 14.1.1.Local Relay Setting
  - 14.1.2.Remote Relay Switch Setting
- 14.2.Web Relay Setting
- 14.3.Door Unlock Configuration
15.Device Integration with Third Party Device
- 15.1.Lift Control
  - 15.1.1.Configure Lift Control
  - 15.1.2.Configure Lift Control Prompt
- 15.2.Smart Living Setting
16.Firmware Upgrade
17. Backup
18.Auto-provisioning
- 18.1.Provisioning Principle
- 18.2.Introduction to the Configuration Files for Auto-P
- 18.3.Autop Schedule
- 18.4.Static Provisioning Configuration
19.Call Log
20.Debug
- 20.1.System Log for Debugging
- 20.2. PCAP for Debugging
21.Password Modification
- 21.1.Modify Device Advanced Setting Password
- 21.2.Modify Device Web Interface Password
22.System Reboot&Reset
- 22.1.Reboot
  - 22.1.1.Reboot on the Device
  - 22.1.2.Reboot on the Web Interface
- 22.2. Reset
  - 22.2.1.Reset on the Device
  - 22.2.2.Reset on the Web Interface
23.Abbreviations
24.FAQ
25.Contact US

C313W- 2Indoor Monitor Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

Parameter Set-up:

 Multicast Setting: to set the indoor monitor in one of the groups or

disable this function.

 Multicast List: to fill in the parameters of multicast group. Indoor monitor

will establish multicast calls to other indoor monitors which are set in

multicast group.

 Listen List: to fill in the parameters of listen group. Indoor monitor will

receive multicast calls if some indoor monitors call the listen group.

 Label: To show the label name on the calling interface if users establish

all call.

10.14. Call Forwarding Setting

Call Forward is a feature used to redirect an incoming call to the specific third

party. Users can redirect the incoming call if it is no answer.