Product Info

ManualsBrandsAKUVOX NETWORKS ManualsElectronics2-Wire Intercom

Table Of Contents

1.Product Overview
2.Change Log
3.Introduction to Configuration Menu
4.Access the Device
- 4.1.Device Start-up Selection
- 4.2.Device Home Screen Type Selection
- 4.3.Accessing the Device Setting on the Device
  - 4.3.1.Accessing Device Basic Setting.
  - 4.3.2.Accessing Device Advanced Setting
- 4.4.Access the Device Setting on the Web Interface
5.Language and Time Setting
- 5.1.Language Setting
  - 5.1.1. Language Setting on the Device
  - 5.1.2. Language Setting on the Web Interface.
- 5.2.Time Setting
  - 5.2.1.Time Setting on the Device
  - 5.2.2.Time Setting on the Device Web Interface
    - 5.2.2.1.Time Setting on the Device Web Interface
    - 5.2.2.2.Daylight Saving Time Setting
6.Screen Display Configuration
- 6.1.Screen Display setting on the Device
- 6.2.Screen Display Setting on the Web Interface
- 6.3.Screensaver Configuration
- 6.4.Upload Device Booting Image
- 6.5.Upload Web interface logo
- 6.6.Icon Screen Display Configuration
7.Sound and Volume Configuration
- 7.1.Volume Configuration
  - 7.1.1. Configure Volume on the Device
  - 7.1.2.Configure Volume on the Web Interface
8.Phone Book Configuration
- 8.1.Phone Book Configuration on the Device
- 8.2.Phone Book Configuration on the Web Interface
9.Network Setting
- 9.1.Device Network Configuration
  - 9.1.1.Configuring Network Connection on the Device
  - 9.1.2.Configuring Device Network Connection on the Web I
- 9.2.Device Deployment in Network
- 9.3. Device NAT Setting
- 9.4.Device Wi-Fi Setting
- 9.5.VLAN Setting
10.Intercom Call Configuration
- 10.1.IP call & IP Call Configuration
- 10.2.SIP Call &SIP Call Configuration
- 10.3.SIP Account Registration
- 10.4.SIP Server Configuration
- 10.5.Outbound Proxy Server configuration
- 10.6.SIP Call Configuration
- 10.7.Device Local RTP configuration
- 10.8.Data Transmission Type Configuration
- 10.9.Call Setting
  - 10.9.1.Call Auto-answer Configuration
  - 10.9.2.Auto-answer Allow List setting
- 10.10. Intercom Call Configuration
- 10.11.SIP Hacking Protection
- 10.12.Emergency Call Setting
- 10.13.Multicast Configuration
- 10.14.Call Forwarding Setting
  - 10.14.1.Call Forwarding Configuration on the Device
  - 10.14.2.Call Forwarding Configuration on the Web Interface
11.Intercom Message Setting
- 11.1.Manage Text Messages
- 11.2.Manage Voice Message
12.Audio& Video Codec Configuration for SIP Calls
- 12.1.Audio Codec Configuration
- 12.2.Video Codec Configuration
13.Security
- 13.1.Monitor and Image
- 13.2.Alarm and Arming Configuration
- 13.3.Screen Unlock Setting
  - 13.3.1.Screen Unlock by PIN Code
- 13.4.Client Certificate Setting
  - 13.4.1.Web Server Certificate
  - 13.4.2.Client Certificate
- 13.5.Power Output Setting
14.Door Access Control Configuration
- 14.1.Relay Switch Setting
  - 14.1.1.Local Relay Setting
  - 14.1.2.Remote Relay Switch Setting
- 14.2.Web Relay Setting
- 14.3.Door Unlock Configuration
15.Device Integration with Third Party Device
- 15.1.Lift Control
  - 15.1.1.Configure Lift Control
  - 15.1.2.Configure Lift Control Prompt
- 15.2.Smart Living Setting
16.Firmware Upgrade
17. Backup
18.Auto-provisioning
- 18.1.Provisioning Principle
- 18.2.Introduction to the Configuration Files for Auto-P
- 18.3.Autop Schedule
- 18.4.Static Provisioning Configuration
19.Call Log
20.Debug
- 20.1.System Log for Debugging
- 20.2. PCAP for Debugging
21.Password Modification
- 21.1.Modify Device Advanced Setting Password
- 21.2.Modify Device Web Interface Password
22.System Reboot&Reset
- 22.1.Reboot
  - 22.1.1.Reboot on the Device
  - 22.1.2.Reboot on the Web Interface
- 22.2. Reset
  - 22.2.1.Reset on the Device
  - 22.2.2.Reset on the Web Interface
23.Abbreviations
24.FAQ
25.Contact US

C313W- 2 Indoor Monitor Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

3.Introduction to Configuration Menu

Status: This section gives you basic information such as product information,

Network Information, and account information, etc.

Account: This section concerns SIP account, SIP server, proxy server,

transport protocol type, audio&video codec, DTMF, session timer, etc.

Network: This section mainly deals with DHCP&Static IP setting, RTP port

setting, and device deployment, etc.

Phone: This section includes Time&language, call feature, dial management,

data import&export, door log, web relay.

Contacts: This section allows the user to configure the local contact list

store in the device.

Upgrade: This section covers Firmware upgrade, device reset&reboot,

configuration file auto-provisioning, PCAP.

Security: This section is for password modification, account status & session

time out configuration, as well as service location switching.

Settings: This section is including the RTSPD & voice assistance setup.

Arming: This section covers the configuration including, arming zone setting,

arming mode, disarm code, and alarm action.

 Mode selection:

Discovery mode: It is a plug and play configuration mode. Akuvox devices

will configure themselves automatically when users power on the devices

and connect them to the network. It is super time-saving mode and it will

greatly bring users convenience by reducing manual operations. This mode

requires no prior configurations previously by the administrator.

Cloud mode: Akuvox SmartPlus is an all-in-one management system.

Akuvox Cloud is the mobile service that allows audio, video, remote access