Owner`s manual
REFERENCE
33
Programming the Remote Control to Operate the TV
The HDTV Receiver remote control is a multi-brand or universal remote con-
trol that can be programmed to operate most remote-controllable TVs from
other manufacturers.
ote
The remote control may not be able to control all models of other brands.
11
Test your remote control.
To find out whether your remote control can operate a TV without pro-
gramming, turn on the TV and press the TV on the remote control while
pointing at the TV. Use the TV POWER and TV PR +/â buttons to see if
the TV responds properly. If not, the remote control requires program-
ming.
22
Turn on the TV to be programmed.
33
Find the manufacturer code for your TV. (Refer to pages 34-35)
44
While holding down TV POWER button, press the number buttons
to select the manufacturer code for your TV.
55
Test the remote control functions to see if the device responds
properly. If not, repeat from step 3-4.
You can control your TV using the buttons below.
By pressing You can
POWER Turn the TV on or off.
TV/AV Switch the TVâs input source between the TV and other
input sources.
PR +/â Scans up or down through memorized programmes.
VOL +/â Adjust the volume of the TV.
MUTE Temporarily turns TV sound OFF, press again to restore.