Owner`s manual

Setup Menu Options
MENU OPERATION
19
ote
PIN is needed to access the SETUP menu if [Lock System] option is set
to [On].
Signal Strength
Shows the strength bar for incoming signal to help you adjust the antenna to
the correct position from your location.
11
Press MENU to display the on-screen menu.
22
Select the SETUP menu using
33
/
44
then press (SELECT) or
22
.
33
Select the Signal Strength using
33
/
44
.
The signal strength bar will be displayed.
44
Press MENU to return to the previous screen or press EXIT on the
remote control to return to TV viewing.
ip
You can also view signal strength bar by pressing SIGNAL on the remote
control.