Owner`s manual

Setting the Display Format
16
The HDTV Receiver provides several display formats. The DISPLAY FOR-
MAT button on the front panel changes the output resolution. The output res-
olution may be converted from the original broadcast format.
Display Format Setup
11
Press DISPLAY FORMAT once on the front panel.
The current output signal will appear in the display window.
22
Depending on the type of Monitor that the HDTV Receiver is con-
nected to, press DISPLAY FORMAT or
11
/
22
repeatedly on the front
panel to select desired output connector. (YPbPr, RGB, or DVI.)
Press MENU button if you wish to exit the display format setting.
33
Use SELECT on the front panel to confirm your output connector
selection.
The current output resolution will appear in the display window.
44
Depending on the type of Monitor that the HDTV Receiver is con-
nected to, press DISPLAY FORMAT or
11
/
22
repeatedly on the front
panel to select desired output resolution. (1080i, 720p, 576p, 576i)
Press MENU button if you wish to return to the output connector setting
mode.
55
Press (SELECT) on the front panel to confirm your output resolu-
tion selection.
Display Format setup is finished.
otes
• You can exit Display Format Setup mode by pressing EXIT on the front
panel.
• The S-VIDEO and VIDEO OUT jacks’ signals are converted from all for-
mats to 576i format.
• When using Composite video or S-video outputs from HDTV Receiver, on-
screen display will only appear and operate if 576i format is selected.
Display Format modes Input Signal format Output Signal format
1080i all formats 1080i
720p all formats 720p
576p all formats 576p
576i all formats 576i
OUTPUT CONNECTION AVAILABLE FORMATS
COMPONENT VIDEO OUT 1080i/720p/576p/576i
RGB OUT 1080i/720p/576p
DVI OUT 1080i/720p/576p
VIDEO OUT All formats converted to 576i
S-VIDEO OUT All formats converted to 576i
DISPLAY FORMAT