User manual

GMR1886DAB
4 Features
POWER button
4.1 Turn ON/OFF/STANDBY
1. Turn on the DAB Digital Radio by pressing the POWER button. The
first time the DAB Digital Radio is switched, it will start up DAB mode.
It will automatically scan for the available radio stations to fig.1.
2. When your DAB Digital Radio is using power adapter, press POWER
button to switch ‘on’ and ‘standby’ to fig.2. Unplug the power adapter
to turn off your Digital Radio completely.
3. When your DAB Digital Radio is using batteries, press POWER button
to switch ‘on’ and ‘off’.
DAB/FM button
4.2 Switching to DAB/FM mode
1. The first time the DAB Digital Radio is switched, it will start up DAB
mode.
2. If the DAB Digital Radio is in DAB mode, press the DAB/FM button
repeatedly until FM is shown on the display.
3. Once in FM mode, your DAB Digital Radio will tune to the start of the
available FM range (87.50MHz) or the last FM station listed to fig.3.
4. To manually change the FM frequency, make sure that you have not
selected any other sub-menus. Turn the –CHANNEL+ to change the
frequency by 0.05MHz.
INFO/MENU button
4.3 Changing the DAB display information
1. If the DAB Digital Radio is in DAB mode, press INFO/MENU button to
select different info to show on the display, such as DLS (Dynamic
Label Segment), signal strength, PTY (Programme Type), ensemble,
frequency, signal quality, bitrate codec, time, date.
2. If the DAB Digital Radio is in FM mode, press INFO/MENU button to
select different info to show on the display, such as radio text, PTY
(Programme Type), PS (Programme Service), stereo/mono, time,
date.
Scaning...
Standby
87.50MHz
[No RadioText]
Fig.1
Fig.2
Fig.3