User guide

9
04
Using the DAB Radio
Station Display Symbols
You may see some symbols displayed
alongside the station names. These are
defined as follows:
? This is displayed before the station
name if the station is not available or
not active.
>> Chevrons displayed after the station
name indicate that this is a primary
station with secondary services.
<< Chevrons displayed before the
station name indicate that this is a
secondary station.
Storing DAB Presets
You can preset up to 10 DAB stations
for easy access as follows:
1. Tune to the station you wish to
preset.
2. Press and hold the PRESET button.
3. Use the CHANNEL +/- button to
select an empty preset slot.
4. Press the SELECT button to store
the station in the preset. ‘Preset
# saved’ will appear on the
second line of the display, where # is
the number of the preset position.
If you have already saved a DAB station
in that preset location, it will be over-
written with the new station.
Selecting a Preset Station
To select a preset station:
1. Press the PRESET button.
2. Use the CHANNEL +/- button to
select the required preset slot.
3. Press the SELECT button to switch
to the station.
If you have not already stored a DAB
station in one of the presets, ‘ Empty
preset ’ will be displayed. The
display will revert to the previously
selected station after a few seconds.
Reset
You can delete all of the preset stations
and return the DAB digital radio to its
factory settings as follows:
1. Press and hold the INFO/MENU
button.
2. Use the CHANNEL +/- button to
select the SYSTEM option.
3. Press the SELECT button.
4. Use the CHANNEL +/- button to
select the FACTORY RESET option.
5. Press the SELECT button.
6. The display will show ‘ Press
SELECT to confi rm
reset... ’
7. Press the SELECT button. The
display will show ‘ Welcome to
DAB ’ before performing a new scan
for stations.
The DAB digital radio will be returned to
its factory condition.