User guide

8
04
8
Using the DAB Radio
Switching On for the First Time
To switch on, turn the On/Off switch to
the right. The DISPLAY will illuminate
and ‘ Welcome to DAB ’ will be
displayed.
The DAB digital radio will automatically
begin to scan for stations. The screen
shown below is displayed. A bar graph
indicates the progress of the search.
When the scan is complete, the DAB
digital radio will select the first available
station - stations are listed in numerical
then alphabetic order.
The station list is retained in memory
so the next time you switch the DAB
digital radio on, the station search does
not take place.
If there are no stations found, check
that adequate DAB coverage exists in
your area.
It is possible to perform a manual scan
for stations, see See Manual Tune on
page 13.
Changing DAB Stations
Press the CHANNEL +/- button to
scroll up and down the list of available
stations. The station names will appear
on line 3 of the display.
When the desired station is displayed,
press SELECT. The DAB digital radio will
tune to that station.
Adjusting the Volume
Press the VOLUME +/- button to
increase or decrease the volume.
Scanning for DAB Stations
Due to the nature of DAB radio,
additional stations and services
regularly become available. If you wish
to see if there have been any new DAB
stations introduced in your area you can
initiate a search.
To iniate a search:
1. Press and hold the INFO/MENU
button to display the menu system.
2. Use the CHANNEL +/- button to
select the FULL SCAN option.
3. Press the SELECT button to activate a
local search for stations.
The DAB digital radio will automatically
begin to scan for stations. The screen
shown below is displayed. A bar graph
indicates the progress of the search
and the number of stations found as the
scan progresses.
Signal Strength
Symbol
Progress bar
Progress bar