User guide

10
04
10
Using the DAB Radio
Changing the DAB Display
Information
It is possible to change the information
that is displayed on the third line of
the display when listening to a DAB
station. Note that this information is not
available when listening to conventional
FM stations.
There are seven types of information
available listed below with examples
listed to the right of the text. To change
the information displayed press the
INFO/MENU button repeatedly.
Dynamic Label Segment (DLS)
This is scrolling text information
supplied by the DAB station. It may
comprise information on music titles
or details of the programme and is
provided by the broadcaster.
Program Type (PTY)
This is a description of the type of
programme provided by the DAB station
and is provided by the broadcaster.
Multiplex Name
This will show the multiplex that is
broadcasting the programme you are
listening to.
Time and Date
This displays the time and date and is
provided by the broadcaster, so will be
accurate.
Channel and Frequency
This displays the channel number and
the transmission frequency.
Signal Information
This shows the digital bit-rate and the
signal mode.
Signal Error Rate
If the transmission signal contains errors
the system can apply correction.
The amount of signal correction can be
displayed as a numerical value between
0 and 99. As the value increases, you
will hear the signal degrade.
To improve reception, try adjusting the
position of the aerial.