Phau Ntawv Qhia

www.akrapovic.com

16 / 18

FINAL INSTALLATION:

MAINTENANCE OF THE AKRAPOVIČ PRODUCT:

Clean grease spots o󰀨 all Akrapovič product’s surfaces, when installation is nished. Cleaning will prevent

spots from burning onto the surface. Do not use aggressive chemical cleaners, because they can damage

the surface or stickers:

Make sure all the nuts and bolts are su󰀩ciently tightened. In case the Akrapovič product touches the cowling

or other parts, repeat the adjustment of the product or contact your authorized dealer.

Reinstall all dismounted or partially removed stock parts (cowlings, radiator etc); check vehicle manufacturer

workshop manual for correct procedures and tightening torques.

• Titanium surfaces (titanium mu󰀪er’s outer sleeve, titanium pipes etc): use a soft cloth sprayed with a multi-

purpose spray lubricant (WD-40

or equivalent)*, then wipe with a soft dry cloth.

• Carbon-ber surfaces (carbon-ber outlet cap, carbon-ber mu󰀪er’s outer sleeve, carbon-ber bracket

etc): use a soft dry cloth sprayed with all purpose foam cleaner, then wipe with a soft dry cloth.

• Painted surfaces (painted outlet cap, painted mu󰀪er’s outer sleeve, painted bracket etc): use a soft cloth

sprayed with all purpose foam cleaner, then wipe with a soft dry cloth.

• Chrome plated surfaces (chrome plated outlet cap, chrome plated mu󰀪er’s outer sleeve etc): use a soft

cloth sprayed with all purpose foam cleaner, then wipe with a soft dry cloth.

• Stainless steel surfaces (stainless steel mu󰀪er’s outer sleeve, stainless steel pipes etc): use a soft cloth

sprayed with a contact cleaner, then wipe with a soft dry cloth.

IMPORTANT: periodically make sure all the bolts and springs are su󰀩ciently tightened. In case

the product touches the cowling or other parts repeat the adjustment of the product or contact

your authorized dealer!

CAUTION: after running engine for 30 minutes, retighten the bolts of the Akrapovič carbon-ber

heat shield!

IMPORTANT: IT IS NORMAL IF WHITE SMOKE COMES OUT OF THE MUFFLER DURING THE

FIRST 100 KM AFTER REPLACEMENT.

IMPORTANT: A CHANGE IN THE COLOR OF THE EXHAUST SYSTEM IS NORMAL DUE TO THE

HIGH TEMPERATURES.

CAUTION: DO NOT STAND BEHIND THE MUFFLER AT ANY TIME.

IMPORTANT: DO NOT USE AUTOMOTIVE WHEEL CLEANERS OR ANY CLEANING PRODUCTS

WHICH CONTAIN ACIDIC ADDITIVES TO CLEAN AKRAPOVIČ PRODUCTS.

IMPORTANT: WE RECOMMEND HIGH CAUTION WHEN USING POWER / PRESSURE WASHER

FOR CLEANING PAINTED / LACQUERED SURFACES OF THE AKRAPOVIČ PRODUCTS, TO

AVOID PAINT / LACQUER DAMAGE.

IMPORTANT: ALL AKRAPOVIČ PRODUCTS ARE DEVELOPED AND DESIGNED TO BE USED ON

SPECIFIC VEHICLES, FOR THEIR ENTIRE EXPECTED LIFETIME. PLEASE MAKE SURE THAT

END-OF-LIFE AKRAPOVIČ PRODUCT IS DISASSEMBLED TO COMPONENTS SHOWN IN THE

PRODUCT’S SCHEMATIC DIAGRAM AVAILABLE ON THE AKRAPOVIČ WEBSITE AND EACH

COMPONENT SCRAPPED RESPONSIBLY AND ACCORDING TO APPLICABLE LOCAL LAWS

AND REGULATIONS. AKRAPOVIČ DOES NOT ASSUME ANY OBLIGATION OR RESPONSIBILITY

WITH RESPECT TO THE SCRAPPING PROCESS OR PROVIDING INFORMATION RELATED

THERETO.

*WD-40

is a trademark of the WD-40 Company.