Phau Ntawv Qhia

F 09
F 10
www.akrapovic.com
10 / 14
Install and tighten the heat shield onto the mu󰀪er, as shown (F 09).
IMPORTANT: make sure not to damage any part of the exhaust system or motorcycle during this procedure!
5.
Position the mu󰀪er in respect to the motorcycle, tighten the mu󰀪er’s bracket bolt and clamp to the specied torques
(F 10, 11).
IMPORTANT: be careful not to injure yourself and any part of the motorcycle during this procedure!
6.
4.9Nm
3.6ftlb
22Nm
16ftlb