Owner`s manual

Syncron User manual. Functions description. Top panel.
4

FUNCTIONS DESCRIPTION
Top panel
1. VFD DISPLAY. This high-quality VFD display shows all functions
are active. The screen icons are explained in the VFD display
section (see page 11).
2. SEAMLESS LOOP (Loop without interruption).
IN BUTTON. This button lets you create a CUE point without pause.
This type of cue point is often called "hot cue" or "Cue on the fly".
In addition, simultaneously determines the starting point of a Loop.
OUT BUTTON. This button is used to set the end point of a loop. A
loop starts by pressing the IN button. A selected Loop will repeat
continuously until you press a second time OUT (EXIT LOOP).
Finally, in AUTOLOOP mode (page 4, point 3) this button will also
serve to set the Loop at the time we press the button.
RELOOP BUTTON. If we made a loop and we're not playing (IN / OUT
/ RELOOP are lit), pressing the RELOOP button, the Loop instantly
begin to play (buttons IN / OUT / flash). To exit the Loop and
continue playback, press the OUT button. When RELOOP is available
(we have a loop) in the display will read RELOOP. When the loop is
playing, RELOOP word flashes on the display. When the Loop is
requested but is not playing RELOOP fixed appears in the display.
EDIT A POINT. In loop mode, hold down RELOOP at least 2 seconds,
the OUT button flash and the display shows the time point of the
loop OUT (output), can now turn the wheel (JOG-WHEEL) to edit out
point. Then press OUT to exit the editing or RELOOP press again,
the button IN blinks and IN "IN EDIT" is displayed on the VFD, you
can now spin the wheel to adjust the IN point. Then press IN button
to exit the edit.
In Loop editing mode, you can switch between modifying entry loop
(IN) and final loop (OUT) by pressing the RELOOP button.
How to edit a LOOP?
- Loop Manual: press IN when you want to start the Loop. Press the
OUT button when you want to finish it. At this time the Loop will
play continuously. IN and OUT buttons flash and RELOOP button is
illuminated.
To exit the LOOP press Loop. The buttons IN / OUT / RELOOP
remain illuminated indicating that we have a Loop. To replay the
Loop press RELOOP. If not stored the Loop created (SAVE), it will
only be available while we do not create another LOOP.
3. CONTROL TRACK. This control has four functions:
a) Turn the control: selection of tracks in a folder. Turning forward
later in the list of tracks and turning backwards, backwards in the
track list
b) Repeatedly pressing the control, we can see on the display
information on the current track: name / title / Artist / Album /
Genre.