Owner`s manual

Syncron user manual. Virtual DJ LE functions.
28

Mixer panel
Most of the functions of a mixer are standard and therefore the
operation of this part of the device is basically the same as when it
operates as a player. Therefore in this section will explain only
certain controls.
1. VIDEO MODE: Pressing the mode RELAY enter Video. In this
mode some of the controls change its function. To deactivate press
the button again. When Video mode is active RELAY LED lights.
If we press the button while holding down SHIFT button the Virtual
DJ switches to the SCRATCH page.
2 and 3. F. START: If Fader Start is enabled, moving the crossfader
from one side to another, on the other side decks with this feature
turned on will start playing automatically. To be active is necessary
to produce a transition from OFF to ON to the computer to send the
corresponding MIDI signal, not enough that the switch is in the ON
position. For example, if the deck 1 and 3 is off and being on deck
1 move the switch to ON will be enabled to deck 1. If, after we
switch to deck 3, the switch will remain in the ON position, but for
this deck, the Fader Start function will remain disabled. To activate
it necessary to move the position of the control ON to OFF and
move from OFF to ON again be activated. If, when the switch is OFF
we change to Deck 1 again, will not change the state of the deck 1,
which will remain disabled Fader Start.
Front panel
The controls for the microphone are working independently and
therefore do not control any function of Virtual DJ.
1. MIX: This control selects the percentage of MASTER we want to
hear through headphones. Move the slider to the left (CH1) to not
hear MASTER through headphones. Move the slider to the right
(CH2) to listen MASTER through headphones
2. LEVEL: Turn this control can adjust the headphone volume.