Owner`s manual

Syncron user manual. Virtual DJ LE functions.
26

DESCRIPTION OF VIRTUAL DJ. FUNCTIONS
Top panel
1. VFD DISPLAY: The VFD display will show the MIDI MODE channel
number MIDI deck 1 - channel number MIDI mixer - channel number
MIDI deck 2.
2. LOOP: this three buttons let you create and modify loops.
IN BUTTON: This button lets you create a CUE point without pause
playback (real time cue). In addition, simultaneously determines the
starting point of a loop.
Pressing IN while holding SHIFT enter edit mode for the starting
point of the Loop. The modification is performed by turning the
wheel.
To exit this mode will need to press SHIFT and one of three
buttons, OUT or RELOOP to change the mode or IN to exit the
current mode.
While staying on the way to change the starting point the led of the
IN button blinks.
OUT BUTTON: This button is used to set the end point of the Loop.
The Loop will repeat continuously until you press a second time
OUT (loop exit).
Pressing OUT while holding SHIFT entered edit mode end point
Loop. The modification is performed by turning the wheel.
To exit this mode will need to press SHIFT and one of the three
buttons, IN or RELOOP to switch modes or OUT to exit the current
mode.
While we are in change mode endpoint OUT button LED blinks.
RELOOP BUTTON: If we made a loop and we are not playing by
pressing RELOOP Loop playback starts instantly. To exit the Loop
and continue playback, press the OUT button.
Pressing RELOOP while holding down SHIFT we enter in Loop shift
mode. The modification is performed by turning the wheel.
To exit this mode will need to press SHIFT and one of the three
buttons, IN or OUT to change the mode or RELOOP to exit the
current mode.
While we are in shift mode endpoint RELOOP button LED blinks.
3. TRACK: Turning the control we move through the list of songs
and press charges the song on the deck in question.
SHIFT pressed while turning the control select the size of the Loop
and pressing create or exit the Loop.
When we are in video mode, with this control we can select and
activate the desired transition.
4. FOLDER: Turning the control we move through folders and
pressing it will show or hide the subfolders. SHIFT pressed while
turning the control we move the Loop in the direction you turn the
control. The movements that occur are the same size as the Loop.
Pressing, activate or deactivate the Loop.
When we are in video mode, with this control we can select and
activate the desired effect.
If while holding down the play SAMPLE button, we turn on the
control, the sample size will be multiplied or divided by 2, and
pressing it, change the playback mode of the single sample
playback to continuous playback.
5. DECK SELECTOR: Pressing this button will select the Virtual DJ
deck controlled from the deck of Syncron. The LEDs are at the top
of the button indicate which deck we are currently handling.
6. HOT CUE / SAMPLE SELECTOR MODE: This button will select
the way the buttons labeled with a (7) are. When the LED is lit so
we're in Sample mode and when the LED is off in Hot Cue mode.
7. HOT CUE / SAMPLES: Depending on which mode we are, these
four buttons can have two functions. The mode is selected with the
SAMPLE button (see point 6).
HOT CUE MODE: In this mode, pressing a button is not lit it will
create a cue point at the moment is pressed and stored in the
corresponding position. The button will be lit red. Pressing a button
lit up the playback jumps to the cue point corresponding to the
button without stopping playback. To delete a stored cue point will
need to press the button while holding down DELETE (see item 8).
SAMPLE MODE: The main function of these buttons is play or pause
playback of a given sample. When a sample is playing, the button
for the sample will glow green. The four buttons on the left deck