Owner`s manual

Syncron User manual. Sound card setup
21

This configuration we have the master output on the rear outputs
of SYNCRON (Master balanced, unbalanced and Booth) and Monitor
output for the SYNCRON front headphone jack.
In Input Routing must select input 1 and 2 in Input Channel A for
the left-right respectively. Similarly associate Input Channel B to
SYNCRON inputs 3 and 4.
From this standard configuration you can make any changes it
deems useful. If you want to use an external mixer must select
External Preferences / Output Routing / Mixing mode and assign
each channel to a SYNCRON output. You should select the MIDI
CTRL option in the mixer panel if you want available the analog
outputs. Remember that channels 3 and 4 are accessible only on
the front headphones output.
For other configurations see the Traktor manual.
Mac Configuration
Connect your SYNCRON to an USB on your Mac using the supplied
cable. Open the MIDI Audio Setup application. You will find it in the
Utilities folder within the Applications folder on your Mac. The
Audio MIDI Setup window will open.
Your Mac will detect SYNCRON controller as an external device with
4 inputs/4 outputs.
Virtual DJ
We can use both inputs and outputs depending on the settings you
want.
1. - MIDI Mode: Sends Channel 1 & 2 to Master, and channels 3 & 4
to headphones
Select> Setup / Audio Configuration and configured it as follows:
- INPUTS NONE.
- HEADPHONES Master-Out: Channel 1 & 2 / Headphones: Channels
3 & 4.
- Sound Card> SYNCRON 4 OUT CARD
2. - AUX mode: We can send through the SYNCRON controller
inputs any external source directly to the master/headphones of
the mixer. For example, two KURO or K2 players in USB or CD mode
(if used a turntable be sure to select Phono).
Select: Setup / Audio configuration and configured it as follows:
- Inputs LINE/INs.
- HEADPHONES Master-Outputs: Channel 1 & 2 / Headphones:
Channels 3 & 4.
- Sound Card: 4-IN/4-OUT SYNCRON.