Owner`s manual

Syncron User manual. Creation of Database.
16

Step 5, press FINISH.
Once installed the DB Generator plug your USB device to your
device and run DB Generator on it. Then see a set of charts to
indicate how to perform this operation.
CREATION OF THE DATABASE
- Scan and create database:
Follow the instructions outlined in each of the graphs will
encounter during the creation of the database. The database
created will simplify the search for clues through SYNCRON
controls.
Step 1: Select on your computer the USB device to be sorted for
later use on your SYNCRON. Click “Generate”
Step 2: Automatically will begin the analysis process (Processing).
Step 3: Upon completion of the analysis, in the Creator window will
appear database analysis report. This indicates that the creation of
the database has been performed.
NOTE: Each time you modify the contents of your USB device is
necessary to redo the above process to create a new database
according to the new content.
We recommend you regularly connect to the web
www.akiyamadj.com
to check for updates to the database.
IMPORTANT Akiyama Syncron USB-PLAYER can use hard drives with
a maximum capacity of 500 GB if these are formatted to FAT32.
Most hard drives are formatted in NTFS when you buy them, and
Windows can’t format drives over 32GB to FAT32 format, therefore
it is necessary that these hard drives are formatted with the
program DB Generator that you can find at:
http://www.akiyamadj.com/781/syncron-midi#descargas