Operation Manual

17. HEADSHELL - Install cartridge here. When installing a cartridge, refer to the

installation instructions supplied by the manufacturer of that cartridge. During

installation, attach the stylus protector to guard the stylus tip from damage.

Attach wires as follows:

White (L+) Left channel+

Blue (L-) Left channel -

Red (R+) Right channel+

Green (R-) Right channel-

18. S-SHAPED TONE ARM

19. TONE ARM LEVER Controls the up and down action of the tone arm lift.

20.ANTI-SKATE CONTROL This applies inward force to the tone arm so it

doesn't skip outward across the record due to the centrifugal force of the record

spinning. Cartridge manufacturers usually specify the proper setting of this.

21. COUNTERWEIGHT Adjustment creates the proper downward pressure of

the stylus to the record. Attach now by sliding the counterweight onto the rear of the

tone arm. Twist it lightly and it will screw onto the rear shaft of the tone arm.

TONE ARM ASSEMBLY

1. Push the power to on and the speed indicator and the stylus 9. Set the cueing lever to the down position, the tone arm will descend

illuminator will light up. slowly onto.

The record and play begins.

2. Insert target light for illumination the stylus.

10. Set the desired pitch adjusts range by depressing the buttons until

3. Place a record on the turntable mat. When playing a 45rpm record the desired pitch is reached.

with a large centre hole; place the 45rpm adapter on the centre Options are +/-10%.

spindle.

11. Adjust the pitch to a desirable speed.

4. Set the rotation speed (33/45/78) to match the record.

12. To suspend play, lift tone arm with cueing lever.

5. Release the arm clamp.

13. When play is finished, raise the cueing lever, move the tone arm to

6. Set the cueing lever to the up position. the armrest and secure the tone arm with the arm clamp.

7. Press the Start/Stop button and the turntable platter will start to 14. Press the Start/Stop button to stop the platter rotating.

rotate.

15. Push the power to off.

8. Move the tone arm over the desired groove.

OPERATION

dx turntables

english