Manual

Taurus Super-S LCM Introduction
[2]
1.5 Detailed View
1.5.1 Front View
LED/Button
Status
• Power button; blue = power on
HDD1/2
• Green = Data access (read/write)
•
Red = Error or empty drive bay
Rebuild
• OFF = HDD status normal
•
Yellow = Rebuilding data
Select
•
Select setup menu or mode
OK
•
Confirm current option or enter setup menu
1.5.2 Rear View
RAID Switch
RAID Mode
RAID mode can be set via LCD display
Switch position: 1 up, 2 down
RAID mode is locked according to LCD setup
Switch position: 1 up, 2 up
RAID 1 (not possible to set RAID mode via LCD)
Switch position: 1 down, 2 up
RAID 0 (not possible to set RAID mode via LCD)
Switch position: 1 down, 2 down
= Security lock slot
= Power receptacle
eSATA = External SATA port
FW800 = FireWire 800 port
FW400 = FireWire 400 port
USB 2.0 = USB 2.0 High Speed port
To turn on the device, press and hold the
power button for 1 second and then let go.
To turn it off, press and hold the power
button for 3 seconds and then let it go again.
Wait at least 5 seconds after turning off the
power, before turning it back on, or otherwise
it will not work.