Service manual

Model no.:CT-21CBS5CPH.doc
version 1.0
9
MECHANICA DISASSEMBLIES
CABINET BACK REMOVAL
1. Refer to Figure 1, remove 7screws.
2. Pull off cabinet back and remove.
CHASSIS REMOVAL
1. Remove cabinet back.
2. Discharge the picture tube anode (2
nd
anode lead) to the dag coating (picture tube
grounding lead).
3. Disconnect Degaussing coil socket (KE). Picture tube socket, Deflection yoke connector
(KDY). Speaker connectors (KL and KR), and 2
nd
anode lead.
4. Remove chassis completely by sliding it straight back.