Specification

Table of Contents
INSTALLATION
Tools needed....................................................3
Parts supplied...................................................4
Mount heights & clearance...............................5
Venting requirements.......................................6
Calculating vent system length.......................6
Venting methods..............................................7
Electrical requirements....................................8
Preparation......................................................9
Installation................................................10-11
Range hood operations..................................12
USE AND CARE
Troubleshooting...........................................13
Use and care information...............................14
Specications..............................................14
Measurement & wiring diagram...............15-19
MAINTENANCE Cleaning.........................20
Replacing the lter & light bulb.............20-21
WARRANTY Coverage & exception............22
Disclaimer & Contact Us...............................23
Tools needed:
Page 3
Level
Flat-blade
and Phillips
screwdrivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil