Specification

Replacing LED Light Fixture:
• This range hood uses LED light xture: 3W Max 12V LED
• Make sure the range hood is unplugged or turn OFF breaker and the lights are cool to touch.
• Place a at-head screwdriver between light housing and hood body, gently pry up the light housing and search for the
metal clip.
• Apply force to the metal clip and pull out the light xture. Disconnect the power cable and discard the old light x-
ture.
• Reverse the steps to install a new halogen light xture. Turn ON breaker and range hood to test for operation.
WARNING
Hazard of Burns!
Light bulb become extremely hot when turned on.
DO NOT touch bulb until switched off and cooled.
Touching hot bulbs could cause serious burns.
Maintenance (Continued)
Page 22