Specification

Installation (Continued)
To install bafe lters and stainless spacer(s), refer to 10. Bafe Filters and Stainless Steel Spacers on Page 23 for bafe
lter and stainless spacer placement. Refer to Figure 6 for the following ve steps:
Angle bafe lter toward back of hood.
Push bafe lter up until almost level.
Slide forward into recess behind the front of hood.
Lower bafe lter.
Slide back until it ts into resting positions.
Repeat Step 8 to install all bafe lters and stainless spacers.11.
OPTIONAL: Install heating lamps (not included) last. 220V or 120V (for USA & Canada), 250-Watt12.
maximum per lamp.
Turn powe ON in control panel. Check all lights and fan operations.13.
Make sure to leave this Installation Guide for the homeowner.14.
Figure 3
Figure 4
Figure 5
Page 11
Figure 6