Instructions / Assembly

Disposal Flange
with Stopper
Installation Instructions
１
２
1. Support disposal unit with one hand
and inset wrenchette or flat blade
screwdriver into mounting lug on
lower ring and turn ring to left until
disposal is free.
2. Loosen the three mounting screws and
remove the snap ring to remove the
mounting assembly.
3. Apply silicone sealant around hole
and push new flange into hole evenly
on silicone.
Remove excess silicone from hole.
4.Reattach snap ring and mounting
assembly, tightening the three
bolts evenly.
5. Align the mounting tabs with the tracks
and turn lower mounting ring until tabs
lock over ridges.
6. Lubricate gasket on stopper with water
and push slowly into the flange.
Installation
Model: 82201
Questions, problems, missing parts?
call Akicon Customer Service 8 a.m.-6p.m. EST, Monday-Friday
Phone: [phone], Email: [e-mail]
AKICONSHOP.COM
Stopper
Mounting
Ring
Sink
Flange
Fiber
Gasket
Backup
Ring
Screws
Snap
Ring