Use and Care Manual

STEP 5 (Continued)

Gas Conversion

Changing Burner Nozzles

INSTALLATION TIP: To prevent any omissions,

remove ALL existing Natural Gas nozzles before

replacing them with the LP nozzles.

Remove the burner grates, burner caps and burner

rings. Using a 7mm nut driver, remove ALL the

existing Natural Gas burner nozzles. Carefully read

and observe each nozzle label for correct location

(DO NOT force or over-tighten nozzles as doing so

Figure 14

WARNING:

Save the natural gas orifices removed from the

appliance for possible future conversions to natural

gas. You should use the following process to convert

to Natural gas. Take extra care when handling steel

parts.

WARNING:

Care should be taken when removing and replacing

gas components. Use proper support to prevent

damage to components.

NG LPG

7 mm

Installation