Specifications

3 Setting Up
Refer to fig. 1 on page 14.
2. The RF OK LED (4) on the receiver going out means no signal is being received or the
automatic squelch is active.
Switch power to the transmitter ON or move closer to the receiver, to the point that the
RF OK LED (4) will come back on.
• Use a soft cloth moistened with water to clean the receiver surfaces.
18 SR 40 SINGLE
4 Cleaning
SR 40 SINGLE-Hex:Layout 1 01/21/2008 10:42 Seite 18 (Schwarz/Black Auszug)