Spec Sheet



AKG ACOUSTICS GMBH LAXENBURGER STRASSE 254, 1230 VIENNA/AUSTRIA

AKG ACOUSTICS, U.S. 8400 BALBOA BOULEVARD, NORTHRIDGE, CA 91329, U.S.A.

registered in the United States and/or other countries.

Features, specifications and appearance are subject to change without notice.

www.akg.com 2

KEY SPECIFICATIONS

Capsule 1” dual capsule condenser

Polar Pattern 9 selectable polar patterns

(selectable on remote control unit)

Frequency Response 20 Hz to 20 kHz (see frequency response trace

on the AKG webpage)

Sensitivity (Cardioid) 20 mV/Pa (-34 dBV)

Max. SPL for 0.5 % THD 135/155 dB (0/-20 dB pad)

Equivalent Noise Level To IEC 60286-4 16 dB (A)

Signal To Noise 78 dB (A) re 1Pa

Preattenuation Pad -20 dB (selectable on remote control unit)

Bass Cut Filter 80 Hz, 12 dB/octave (selectable on remote control unit)

Electrical Impedance ≤ 200 ohms

Recommended Load Impedance ≥ 1000 ohms

Microphone to remote control unit dedicated 7-pin male XLR

Audio output connector 3-pin XLR (pin 2 hot)

Temperature Range -10 °C to +60 °C (14 °F - 140 °F)

Diameter 54 mm (2.13 in.)

Length 212 mm (8.3 in.)

Net Weight (Mic Only) 765 g (27 oz.)

Shipping Weight 5340 g (188.4 oz.)

Box Dimensions (L x W x H) 41 x 34 x 15 cm (16 x 13.4 x 6 in)

Powering 210-240 VAC or 110-120 VAC (selectable)

Primary fuse 125 mA / 250 V slow-blow

Included Accessories

1 x Spider Shock Mount

1 x Mic & Power Cable For US/EU/UK

1 x Metal Carrying Case

Item Number

P820 TUBE RECORDING MIC 3101H00440