Instructions

C411
III
MANUAL26
INTERFACING
3.2.3 Using the MPA V L
Mini XLR Mini XLR MPA
MPA
MIC 1 MIC 2 MIC 3 MIC 4
Phantom
3 4
1 2
5
3
2
3
1
2
3
1
Figure 4: Connection diagram with MPA V L.
1) Connecting the cable:
Push the mini XLR connector (1) on the pickup cable into the
mini XLR socket (2) on the cable of the MPA V L (3) to the
stop.
The connector will lock automatically.
Disconnecting the cable: refer to section 3.2.1.
2) Connect the MPA V L (3) to a balanced XLR microphone input
with phantom power.
3) Switch the phantom power on. (Refer to the instruction manu-
al of the unit to which you connected your pickup.)
4) If your mixer provides no phantom power: Connect the
MPA V L (3) to an optional AKG phantom power supply (4) and
use an XLR cable (5) to connect the phantom power supply (4)
to the desired balanced input.
3.2.4 Connecting to a Bodypack Transmitter
Refer to the manual of your bodypack transmitter.
C411
III
L
Using the MPA V L
Connecting to
a Bodypack
Transmitter
the condition of the lacquer coat rst.