Specifications

SO 40 snapon transmitter
Item number
Microtools SO 40 snapon transmitter
7615H0201
Complete systems comprising a trans-
mitter and receiver available on request.
For details on which systems are avail-
able in which countries contact your
dealer.
• Professional XLR connector matching all dynamic
microphones
• Ultra-light, glass fiber reinforced miniature case
• Integrated charging contacts
• Extremely low operating cost
The SO 40 snapon transmitter is probably the most cost-
efficient way to upgrade a hardwire microphone for wire-
less use. All you have to do is disconnect the microphone
cable and plug the snapon transmitter into the XLR con-
nector on the microphone. The snapon transmitter with its
small and light glass fiber reinforced case will add less
weight to the microphone than the cable did.
An input gain control lets you match the SO 40 snapon
transmitter to the microphone output level. A noiseless
on/off switch allows you to mute any microphone with no
on/off switch. Integrated charging contacts and the
optional CU 40 charging unit make recharging batteries
easier than ever. Frequencies are color coded for easy
identification in a professional setup using several
WMS 40 systems simultaneously.
Live/Installed
Sound
77
SPECIFICATIONS
Carrier frequency range: 710 MHz to 865 MHz
Modulation: FM
Audio bandwidth: 40 to 20,000 Hz
THD: 0.8% typ.
Signal/noise ratio: 103 dB (A) typ.
Power requirement: single 1.5 V AAA size battery
RF output: 5 mW typ. (ERP)
Battery life: >10 hours (dry batteries)
>5 hours (rechargeable batteries)
Dimensions: 22 x 30 x 98 mm (0.9 x 1.2 x 3.9 in.)
Weight: 36 g (1.3 oz.)
Standard accessories: 1 AAA size battery, black replacement
battery compartment cover
Optional accessories: CU 40 charging unit
7496_04_Fulline_E2_fsch 29.06.2004 13:27 Uhr Seite 77