Specifications

C 419
Item numbers
C 419PP 2579Z0008
C 419L 2579Z0005
• Miniature condenser microphone for wind instruments,
drums and percussion
• Miniature gooseneck for accurate
microphone alignment
• Transducer shock mount reduces handling and
cable noise
This condenser clip-on microphone has been designed
specifically to clip onto the bell of a saxophone, trumpet,
trombone, tuba, or any other wind instrument (e.g.
didgeridoo). Room to move for the wind section at last!
A tight hypercardioid polar pattern reduces spillover from
nearby monitor wedges to a minimum. The flat frequency
response of the C 419 provides a natural, powerful, and
clear sound.
C 419 PP: For hardwire applications, with standard XLR
connector for phantom powering.
C 419 L: With mini XLR connector for use with B 29L bat-
tery operated power supply, MPA III L external phantom
power adapter, or AKG WMS bodypack transmitters.
Micro Mic III
Series
SPECIFICATIONS
Polar pattern: hypercardioid
Frequency range: 20 to 20,000 Hz
Sensitivity: 7 mV/Pa (-43 dBV)
Max. SPL for 1% / 3% THD: 126 / 130 dB
Equivalent noise level: 30 dB-A
Signal/noise ratio (A-weighted): 64 dB
Impedance: ≤200 ohms
Recommended load impedance: ≥1000 ohms
Powering: 9 to 52 V phantom power to DIN 45596 or battery
powering from B 29L or AKG bodypack transmitter
Current consumption: ≤2 mA
Connector: C 419 PP: 3-pin XLR, C 419 L: 3-pin mini XLR
Cable: C 419 PP: 3 m (10 ft.),
C 419 L: 1.5 m (5 ft.)
Finish: matte black
Dimensions: 180 x 35 mm (7 x 1.4 in.)
Net/shipping weight: C 419PP: 141 g (5.1 oz.)/462 g (16.8 oz.)
C 419 L: 77 g (3.1 oz.)/398 g (14.5 oz.)
Standard accessories: microphone bag, W 44
Optional accessories: B 15, B 18, MK 9/10, N 62E, N 66 E
C 419 L: B 29 L, MPA III L
66
7496_04_Fulline_E1_fsch 29.06.2004 13:35 Uhr Seite 66