Specifications

C 562CM
Item number
C 562CM 2262Z0003
• Small, low-profile boundary layer microphone
• Wide frequency range
• High sensitivity
• Ideal for inconspicuous installation in a room
• Suited for surveillance or recording
The C 562CM flush-mount boundary microphone uses the
same transducer as the C 562BL. The C 562CM has been
designed specifically for permanent, “invisible” mounting
in ceilings, walls, tables, stage props, etc.
Owing to its high sensitivity, the C 562CM is a perfect tool
for surveillance or live recording since a single micro-
phone can cover an entire room. The supplied XLR phan-
tom power adapter connects to the microphone cable
through a miniature connector so installation holes can be
smaller than the diameter of the phantom power adapter.
Recording/
Surveillance
SPECIFICATIONS
Polar pattern: omnidirectional (hemispherical)
Frequency range: 20 to 20,000 Hz
Sensitivity: 25 mV/Pa (-32 dBV)
Max. SPL for 1% THD: 130 dB
Equivalent noise level: 16 dB-A
Signal/noise ratio (A-weighted): 78 dB
Impedance: ≤600 ohms
Recommended load impedance: ≥2000 ohms
Powering: 9 to 52 V phantom power to DIN/IEC
Current consumption: ≤2 mA
Connector: 3-pin XLR
Cable: 0.5 m (20 in.)
Finish: matte nickel plated
Dimensions: 20 dia. x 28 mm (0.8 dia. x 1.1 in.)
Net/shipping weight: 30/195 g (1.1/76.9 oz.)
Standard accessories: installation hardware, phantom power
adapter
Optional accessories: B 15, B 18, MK 9/10, N 62E, N 66 E
137
7496_04_Fulline_E2_fsch 29.06.2004 13:30 Uhr Seite 137