Specifications

C 547BL
• “Non-crush” case
• Inconspicuous and rugged
• Hypercardioid polar pattern
• Easy to repaint
Hypercardioid, studio-quality boundary layer microphone
with rugged, “non-crush” case and switchable bass-cut
filter for reducing footfall noise, ideal for tough on-stage
assignments.
Other benefits include optimum acoustic properties, high
directivity, and neutral sound. Having the same frequency
response, the C 547 BL can be combined with the CK 47
with excellent results.
Primarily designed for use in places of worship, theaters,
and conferencing, the C 547 BL is also a good choice for
miking kick drums and other instruments.
C 547 BL-T: Identical to C 547 BL, except with no wind-
screen. For tabletop use.
Installed
Sound
SPECIFICATIONS
Polar pattern: hypercardioid
Frequency range: 30 to 18,000 Hz
Sensitivity: 8.5 mV/Pa (-42 dBV)
Max. SPL for 1% THD: 133 dB
Equivalent noise level: 22 dB-A
Signal/noise ratio (A-weighted): 72 dB
Bass cut filter: 12 dB/octave at 150 Hz
Electrical impedance: ≤400 ohms
Recommended load impedance: ≥1000 ohms
Powering: 9 to 52 V phantom power to DIN 45596
Current consumption: ≤2 mA
Connector: 3-pin XLR
Cable: 3 m (10 ft.)
Finish: matte dark grey
Dimensions: 185 x 120 x 19 mm (7.3 x 4.7 x 0.8 in.)
Net/shipping weight: 160/420 g (5.6 /14.8 oz.)
Standard accessories: W 547 (C 547BL only)
Optional accessories: B 15, B 18, MK 9/10, N 62E, N 66E
Item numbers
C 547BL 2447Z0001
C 547BL-T 2447Z0003
131
7496_04_Fulline_E2_fsch 29.06.2004 13:29 Uhr Seite 131